ABLIC U.S.A. Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
S-1142CC5H-E6T2U
Ver Detalle Hojas de datos

S-1142CC5H-E6T2U

Product Overview

Category

S-1142CC5H-E6T2U belongs to the category of voltage regulators.

Use

This product is used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low power consumption
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

The S-1142CC5H-E6T2U comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

The S-1142CC5H-E6T2U is typically packaged in reels and is available in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.5V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (max)
  • Quiescent Current: 30µA (typ)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: The S-1142CC5H-E6T2U ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices from excessive current flow.
  • Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact electronic devices.
  • High efficiency results in minimal power loss.
  • Wide input voltage range makes it suitable for various applications.
  • Overcurrent and thermal shutdown protection enhance device safety.

Disadvantages

  • Limited output current may not be sufficient for high-power applications.
  • Dropout voltage of 200mV may affect performance in low-voltage scenarios.

Working Principles

The S-1142CC5H-E6T2U operates based on a feedback mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any fluctuations in the input voltage.

Detailed Application Field Plans

The S-1142CC5H-E6T2U finds application in various electronic devices, including: 1. Mobile phones 2. Portable media players 3. Wearable devices 4. IoT devices 5. Battery-powered devices

Detailed and Complete Alternative Models

  1. S-1132Bxx-I6T1G: Similar voltage regulator with higher output current capability.
  2. S-1172Bxx-U5T1G: Voltage regulator with adjustable output voltage.
  3. S-1112Bxx-N4T1G: Low dropout voltage regulator suitable for low-voltage applications.

These alternative models offer different specifications and features to cater to specific requirements.

Word count: 400 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de S-1142CC5H-E6T2U en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of S-1142CC5H-E6T2U in technical solutions:

  1. Q: What is the S-1142CC5H-E6T2U? A: The S-1142CC5H-E6T2U is a voltage detector IC (integrated circuit) that monitors the voltage level in electronic circuits.

  2. Q: What is the operating voltage range of S-1142CC5H-E6T2U? A: The operating voltage range of S-1142CC5H-E6T2U is typically between 0.8V and 6.0V.

  3. Q: How does S-1142CC5H-E6T2U work? A: S-1142CC5H-E6T2U works by comparing the input voltage with a reference voltage. If the input voltage falls below or exceeds the reference voltage, it triggers an output signal.

  4. Q: What is the purpose of using S-1142CC5H-E6T2U in technical solutions? A: S-1142CC5H-E6T2U is commonly used as a voltage monitoring and protection device in various applications, such as battery-powered devices, power management systems, and automotive electronics.

  5. Q: Can S-1142CC5H-E6T2U be used for overvoltage protection? A: Yes, S-1142CC5H-E6T2U can be used for overvoltage protection. It can detect when the input voltage exceeds a certain threshold and trigger an alarm or shutdown mechanism.

  6. Q: Is S-1142CC5H-E6T2U suitable for low-power applications? A: Yes, S-1142CC5H-E6T2U is suitable for low-power applications as it has a low quiescent current consumption, typically around 1.0µA.

  7. Q: Can S-1142CC5H-E6T2U be used in automotive electronics? A: Yes, S-1142CC5H-E6T2U is commonly used in automotive electronics due to its ability to monitor and protect voltage levels in various automotive systems.

  8. Q: Does S-1142CC5H-E6T2U have built-in hysteresis? A: Yes, S-1142CC5H-E6T2U has built-in hysteresis, which helps prevent false triggering by introducing a small voltage difference between the detection and release points.

  9. Q: What is the output configuration of S-1142CC5H-E6T2U? A: S-1142CC5H-E6T2U has an open-drain output configuration, allowing it to interface with other devices or microcontrollers.

  10. Q: Is S-1142CC5H-E6T2U available in different package options? A: Yes, S-1142CC5H-E6T2U is available in different package options, such as SOT-23-5 and USP-6C, providing flexibility for different design requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines for S-1142CC5H-E6T2U.