S-80847CLMC-B68T2G

Product Overview

Category

S-80847CLMC-B68T2G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

• Voltage detection range: 1.6V to 6.0V
• Accuracy: ±2%
• Low supply current: 1.0μA (typ.)
• Small package size: SOT-23-5
• Built-in delay circuit: 200ms (typ.)

Package and Quantity

The S-80847CLMC-B68T2G is packaged in a SOT-23-5 package. It is available in tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

• Supply voltage range: 1.6V to 6.0V
• Operating temperature range: -40°C to +85°C
• Output type: Active low
• Output current: 10mA (max)
• Power consumption: 3.0μW (typ.)

Pin Configuration

The S-80847CLMC-B68T2G has the following pin configuration:

```

---

| | --|VDD |-- Pin 1: Supply Voltage (VDD) --|OUT |-- Pin 2: Output --|GND |-- Pin 3: Ground (GND) --|ENB |-- Pin 4: Enable/Disable --|VIN |-- Pin 5: Voltage Input (VIN) |____| ```

Functional Features

• Voltage detection: The S-80847CLMC-B68T2G can accurately detect the input voltage within the specified range.
• Reset function: When the input voltage drops below the detection threshold, the output goes low, indicating a reset condition.
• Low power consumption: The IC has a very low supply current, making it suitable for battery-powered devices.
• Built-in delay circuit: The integrated delay circuit ensures a stable output signal after the voltage returns to the normal range.

Advantages and Disadvantages

Advantages

• Wide voltage detection range
• High accuracy
• Low power consumption
• Small package size
• Built-in delay circuit for stability

Disadvantages

• Active low output may not be suitable for all applications
• Limited output current capacity

Working Principles

The S-80847CLMC-B68T2G operates by comparing the input voltage (VIN) with an internal reference voltage. When the input voltage falls below the detection threshold, the output (OUT) goes low, indicating a reset condition. The built-in delay circuit ensures that the output remains stable for a specified time after the voltage returns to the normal range.

Detailed Application Field Plans

The S-80847CLMC-B68T2G is widely used in various electronic devices where voltage detection and reset functions are required. Some common application fields include:

1. Microcontrollers: Used to ensure proper initialization and reset of microcontroller units.
2. Power management systems: Employed to monitor power supply voltages and trigger appropriate actions in case of voltage fluctuations or failures.
3. Battery-powered devices: Integrated into portable electronics to prevent damage due to low battery voltage and initiate system shutdown or warning signals.

Detailed and Complete Alternative Models

1. S-80825CLNB-B6KT2G: Similar voltage detection and reset IC with a different package and pin configuration.
2. S-80830CNMC-B8JT2G: Voltage detection and reset IC with a wider operating temperature range and higher output current capacity.
3. S-80840CNNB-B9PT2G: Voltage detection and reset IC with a lower supply voltage range and smaller package size.

These alternative models offer similar functionality to the S-80847CLMC-B68T2G but may have variations in specifications, package types, or additional features.

Word count: 529 words