ABLIC U.S.A. Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
S-812C37BMC-C4RT2G
Ver Detalle Hojas de datos

S-812C37BMC-C4RT2G

Product Overview

Category

The S-812C37BMC-C4RT2G belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit protection

Package

The S-812C37BMC-C4RT2G comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring proper functioning of electronic devices.

Packaging/Quantity

The S-812C37BMC-C4RT2G is typically packaged in reels and is available in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.7V
  • Output Current: 100mA
  • Dropout Voltage: 160mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-812C37BMC-C4RT2G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • High Precision Regulation: The S-812C37BMC-C4RT2G provides precise voltage regulation, ensuring stable output even under varying load conditions.
  • Low Dropout Voltage: With a low dropout voltage of only 160mV, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Low Quiescent Current: The low quiescent current of 30μA ensures minimal power consumption when the device is in standby or idle mode.
  • Thermal Shutdown Protection: The regulator has built-in thermal shutdown protection, which prevents damage due to excessive heat.
  • Short-Circuit Protection: The S-812C37BMC-C4RT2G is equipped with short-circuit protection, safeguarding the circuit from potential damage.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures stable output.
  • Low dropout voltage allows for efficient operation even with low input voltages.
  • Low quiescent current minimizes power consumption.
  • Thermal shutdown protection prevents overheating.
  • Short-circuit protection safeguards the circuit.

Disadvantages

  • Limited output current capacity (100mA).
  • Restricted input voltage range (2.5V - 6.0V).

Working Principles

The S-812C37BMC-C4RT2G operates based on a voltage regulation principle known as a linear regulator. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage despite variations in the input voltage or load conditions. This is achieved by controlling the flow of current through a series pass transistor.

Detailed Application Field Plans

The S-812C37BMC-C4RT2G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Medical equipment - Automotive electronics

Detailed and Complete Alternative Models

  1. S-812C33BMC-C4RT2G: Similar to S-812C37BMC-C4RT2G, but with an output voltage of 3.3V.
  2. S-812C50BMC-C4RT2G: Similar to S-812C37BMC-C4RT2G, but with an output voltage of 5.0V.
  3. S-812C25BMC-C4RT2G: Similar to S-812C37BMC-C4RT2G, but with an output voltage of 2.5V.

These alternative models offer similar characteristics and functionality, but with different output voltage options to suit specific application requirements.

Word count: 511 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de S-812C37BMC-C4RT2G en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of S-812C37BMC-C4RT2G in technical solutions:

  1. Q: What is the S-812C37BMC-C4RT2G? A: The S-812C37BMC-C4RT2G is a voltage regulator IC (integrated circuit) that provides a stable output voltage for various electronic devices.

  2. Q: What is the input voltage range of S-812C37BMC-C4RT2G? A: The input voltage range of S-812C37BMC-C4RT2G is typically between 2.5V and 16V.

  3. Q: What is the output voltage of S-812C37BMC-C4RT2G? A: The output voltage of S-812C37BMC-C4RT2G is fixed at 3.7V.

  4. Q: What is the maximum output current of S-812C37BMC-C4RT2G? A: The maximum output current of S-812C37BMC-C4RT2G is typically 150mA.

  5. Q: Can S-812C37BMC-C4RT2G be used in battery-powered applications? A: Yes, S-812C37BMC-C4RT2G can be used in battery-powered applications as it has low quiescent current and operates efficiently with low input voltages.

  6. Q: Is S-812C37BMC-C4RT2G suitable for automotive applications? A: Yes, S-812C37BMC-C4RT2G is designed to meet the requirements of automotive applications, including high reliability and wide temperature range.

  7. Q: Does S-812C37BMC-C4RT2G have built-in protection features? A: Yes, S-812C37BMC-C4RT2G includes various protection features such as overcurrent protection, thermal shutdown, and short-circuit protection.

  8. Q: Can S-812C37BMC-C4RT2G be used in space-constrained designs? A: Yes, S-812C37BMC-C4RT2G is available in a small package (SOT-23-5), making it suitable for space-constrained designs.

  9. Q: What are the typical applications of S-812C37BMC-C4RT2G? A: S-812C37BMC-C4RT2G can be used in a wide range of applications, including portable devices, IoT (Internet of Things) devices, automotive electronics, and more.

  10. Q: Where can I find more information about S-812C37BMC-C4RT2G? A: You can refer to the datasheet or contact the manufacturer for more detailed information about S-812C37BMC-C4RT2G, including its specifications, application notes, and technical support.