Consulte las especificaciones para obtener detalles del producto.
S-817B23AY-B2-U
Product Overview
Category
S-817B23AY-B2-U belongs to the category of voltage regulators.
Use
This product is used to regulate and stabilize voltage levels in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short-circuit protection
Package
The S-817B23AY-B2-U comes in a small surface mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring reliable operation of electronic devices.
Packaging/Quantity
The S-817B23AY-B2-U is typically packaged in reels and each reel contains a specific quantity of units. The exact packaging and quantity can vary depending on the manufacturer.
Specifications
- Input Voltage Range: 2.0V - 6.0V
- Output Voltage: 2.3V
- Output Current: 50mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 1.0µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-817B23AY-B2-U has the following pin configuration:
- Pin 1: VIN (Input Voltage)
- Pin 2: GND (Ground)
- Pin 3: VOUT (Output Voltage)
Functional Features
- High Precision Regulation: The S-817B23AY-B2-U provides precise voltage regulation, ensuring stable and accurate output voltage.
- Low Dropout Voltage: With a low dropout voltage, this regulator can operate efficiently even when the input voltage is close to the desired output voltage.
- Low Quiescent Current: The quiescent current of only 1.0µA ensures minimal power consumption when the device is in standby or idle mode.
- Thermal Shutdown Protection: The regulator includes a thermal shutdown feature that protects it from overheating, ensuring safe operation.
- Short-Circuit Protection: In case of a short circuit, the S-817B23AY-B2-U automatically shuts down to prevent damage to the circuit.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures stable performance of electronic devices.
- Low dropout voltage allows efficient operation even with low input voltages.
- Low quiescent current minimizes power consumption during standby.
- Thermal shutdown protection prevents overheating and ensures safety.
- Short-circuit protection safeguards the circuit from damage.
Disadvantages
- Limited output current capacity (50mA) may not be suitable for high-power applications.
- Input voltage range (2.0V - 6.0V) restricts compatibility with certain circuits.
Working Principles
The S-817B23AY-B2-U operates based on the principle of a linear voltage regulator. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, regardless of variations in the input voltage or load conditions.
Detailed Application Field Plans
The S-817B23AY-B2-U finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Medical equipment - Industrial control systems
Detailed and Complete Alternative Models
- S-817B25AMC-CWJT2G: Similar to S-817B23AY-B2-U, but with an output voltage of 2.5V.
- S-817B33AMC-CWJT2G: Similar to S-817B23AY-B2-U, but with an output voltage of 3.3V.
- S-817B50AMC-CWJT2G: Similar to S-817B23AY-B2-U, but with an output voltage of 5.0V.
These alternative models provide similar functionality and characteristics, but with different output voltage options to suit specific application requirements.
Note: The above information is based on the general specifications and features of the S-817B23AY-B2-U voltage regulator. For detailed technical information and specific application guidelines, please refer to the product datasheet provided by the manufacturer.
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de S-817B23AY-B2-U en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of S-817B23AY-B2-U in technical solutions:
Q: What is the S-817B23AY-B2-U? A: The S-817B23AY-B2-U is a voltage detector IC (integrated circuit) manufactured by a specific company.
Q: What is the purpose of the S-817B23AY-B2-U? A: The purpose of this IC is to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.
Q: What is the operating voltage range of the S-817B23AY-B2-U? A: The operating voltage range of this IC is typically between 1.6V and 6.0V.
Q: How does the S-817B23AY-B2-U detect voltage levels? A: This IC uses a built-in voltage reference and comparator to compare the input voltage with a preset threshold voltage.
Q: What is the output type of the S-817B23AY-B2-U? A: The output of this IC is an open-drain output, which means it can be connected to other devices or circuits for further processing.
Q: Can the threshold voltage of the S-817B23AY-B2-U be adjusted? A: No, the threshold voltage of this IC is fixed and cannot be adjusted externally.
Q: What is the typical accuracy of the voltage detection in the S-817B23AY-B2-U? A: The typical accuracy of this IC is around ±1.0%.
Q: Is the S-817B23AY-B2-U suitable for automotive applications? A: Yes, this IC is designed to meet the requirements of automotive applications and has a wide operating temperature range.
Q: Can the S-817B23AY-B2-U be used in battery-powered devices? A: Yes, this IC can be used in battery-powered devices as it has a low quiescent current consumption.
Q: What are some typical applications of the S-817B23AY-B2-U? A: Some typical applications include power supply monitoring, battery voltage detection, and system reset functions in various electronic devices.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of the S-817B23AY-B2-U.