Consulte las especificaciones para obtener detalles del producto.
S-818A37AUC-BGRT2G
Product Overview
Category
S-818A37AUC-BGRT2G belongs to the category of electronic components.
Use
This product is commonly used in electronic circuits for various applications.
Characteristics
- Compact size
- High reliability
- Low power consumption
- Wide operating temperature range
Package
The S-818A37AUC-BGRT2G comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to provide precise voltage regulation and protection in electronic circuits.
Packaging/Quantity
The product is typically packaged in reels, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.7V
- Output Current: 100mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 1µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-818A37AUC-BGRT2G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation: The S-818A37AUC-BGRT2G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It safeguards the circuit by limiting the output current to a safe level.
- Low quiescent current: The product consumes minimal current when not actively regulating the voltage.
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration into compact designs.
- High reliability ensures long-term performance.
- Low power consumption helps conserve energy.
- Wide operating temperature range enables usage in various environments.
Disadvantages
- Limited output current may not be suitable for high-power applications.
- Dropout voltage may cause a slight voltage drop across the regulator.
Working Principles
The S-818A37AUC-BGRT2G operates based on the principle of a linear voltage regulator. It uses a feedback mechanism to maintain a constant output voltage, compensating for changes in the input voltage and load conditions. By comparing the output voltage with a reference voltage, the regulator adjusts its internal circuitry to achieve the desired output voltage.
Detailed Application Field Plans
The S-818A37AUC-BGRT2G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT (Internet of Things) devices - Wearable technology - Medical devices
Detailed and Complete Alternative Models
- S-818A33AUC-BGRT2G: Similar to S-818A37AUC-BGRT2G, but with an output voltage of 3.3V.
- S-818A50AUC-BGRT2G: Similar to S-818A37AUC-BGRT2G, but with an output voltage of 5.0V.
- S-818A25AUC-BGRT2G: Similar to S-818A37AUC-BGRT2G, but with an output voltage of 2.5V.
These alternative models provide different output voltages to cater to specific application requirements.
In conclusion, the S-818A37AUC-BGRT2G is a compact and reliable electronic component that offers precise voltage regulation and protection. Its low power consumption and wide operating temperature range make it suitable for various electronic devices. However, its limited output current and dropout voltage should be considered for specific high-power applications.
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de S-818A37AUC-BGRT2G en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of S-818A37AUC-BGRT2G in technical solutions:
1. What is S-818A37AUC-BGRT2G? - S-818A37AUC-BGRT2G is a specific model of voltage detector IC (Integrated Circuit) manufactured by a company called Seiko Instruments. It is designed to detect and monitor voltage levels in various electronic applications.
2. What is the operating voltage range of S-818A37AUC-BGRT2G? - The operating voltage range of S-818A37AUC-BGRT2G is typically between 0.8V and 6.0V.
3. How does S-818A37AUC-BGRT2G work? - S-818A37AUC-BGRT2G works by continuously monitoring the input voltage and comparing it to a predefined threshold voltage. When the input voltage exceeds or falls below this threshold, the output of the IC changes state, indicating the detection of an overvoltage or undervoltage condition.
4. What is the output configuration of S-818A37AUC-BGRT2G? - S-818A37AUC-BGRT2G has an open-drain output configuration, which means that it can only pull the output voltage low when activated. To obtain a high output voltage, an external pull-up resistor is required.
5. What is the typical response time of S-818A37AUC-BGRT2G? - The typical response time of S-818A37AUC-BGRT2G is around 200 microseconds.
6. Can S-818A37AUC-BGRT2G be used for both overvoltage and undervoltage detection? - Yes, S-818A37AUC-BGRT2G can be used for both overvoltage and undervoltage detection. It has a built-in voltage reference that allows it to detect deviations from the desired voltage range in either direction.
7. What is the maximum current consumption of S-818A37AUC-BGRT2G? - The maximum current consumption of S-818A37AUC-BGRT2G is typically around 1 microampere (µA).
8. Can S-818A37AUC-BGRT2G tolerate high input voltages? - No, S-818A37AUC-BGRT2G is not designed to tolerate high input voltages. Its maximum input voltage rating is specified as 6.0V, and exceeding this limit may damage the IC.
9. Is S-818A37AUC-BGRT2G suitable for automotive applications? - Yes, S-818A37AUC-BGRT2G is suitable for automotive applications. It meets the AEC-Q100 Grade 2 qualification, which ensures its reliability and performance in automotive environments.
10. Can S-818A37AUC-BGRT2G be used in battery-powered devices? - Yes, S-818A37AUC-BGRT2G can be used in battery-powered devices. Its low current consumption makes it suitable for applications where power efficiency is crucial, such as portable electronics or IoT devices.
Please note that these answers are general and may vary depending on the specific requirements and datasheet of the S-818A37AUC-BGRT2G model.