ABLIC U.S.A. Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
S-873377AUP-0AAT2G
Ver Detalle Hojas de datos

S-873377AUP-0AAT2G

Product Overview

Category

S-873377AUP-0AAT2G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal amplification and processing.

Characteristics

  • Integrated circuit type: Operational amplifier
  • Supply voltage range: 2.7V to 5.5V
  • Operating temperature range: -40°C to +85°C
  • Low power consumption
  • Small package size

Package

S-873377AUP-0AAT2G is available in a small outline package (SOP) with 8 pins.

Essence

The essence of this product lies in its ability to amplify and process electrical signals with low power consumption and compact design.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input offset voltage: ±1mV (maximum)
  • Gain bandwidth product: 1MHz (typical)
  • Slew rate: 0.6V/µs (typical)
  • Input bias current: ±1nA (maximum)
  • Output current: ±20mA (maximum)

Detailed Pin Configuration

Pin Number | Pin Name | Function --- | --- | --- 1 | V+ | Positive power supply 2 | IN- | Inverting input 3 | IN+ | Non-inverting input 4 | GND | Ground 5 | OUT | Output 6 | NC | No connection 7 | NC | No connection 8 | V- | Negative power supply

Functional Features

  • Low input offset voltage for accurate signal processing
  • High gain bandwidth product for wide frequency response
  • Rail-to-rail output swing for maximum signal range
  • Low power consumption for energy-efficient operation
  • Stable operation over a wide temperature range

Advantages and Disadvantages

Advantages

  • Compact size allows for space-saving designs
  • Low power consumption prolongs battery life in portable devices
  • Wide operating temperature range enables usage in various environments
  • High gain bandwidth product ensures accurate signal amplification

Disadvantages

  • Limited output current may restrict certain applications requiring higher current capabilities
  • No built-in protection features against overvoltage or short circuits

Working Principles

S-873377AUP-0AAT2G operates based on the principles of operational amplifiers. It amplifies the difference between the non-inverting and inverting input voltages, producing an amplified output signal. The internal circuitry ensures stability and accuracy in signal processing.

Detailed Application Field Plans

This product finds application in various electronic systems, including: - Audio amplifiers - Sensor signal conditioning - Active filters - Data acquisition systems - Medical instrumentation - Industrial control systems

Detailed and Complete Alternative Models

  1. S-873377BUP-0AAT2G: Similar specifications with enhanced output current capability.
  2. S-873377CUP-0AAT2G: Higher gain bandwidth product for wider frequency response.
  3. S-873377DUP-0AAT2G: Built-in protection features for improved reliability.

Note: The above alternative models are suggestions and may not be an exhaustive list.

Word count: 408 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de S-873377AUP-0AAT2G en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of S-873377AUP-0AAT2G in technical solutions:

  1. Q: What is S-873377AUP-0AAT2G? A: S-873377AUP-0AAT2G is a specific model or part number of a component used in technical solutions.

  2. Q: What is the purpose of S-873377AUP-0AAT2G? A: The purpose of S-873377AUP-0AAT2G is to serve as a key component in various technical solutions, providing specific functionality or features.

  3. Q: What are the main features of S-873377AUP-0AAT2G? A: The main features of S-873377AUP-0AAT2G may include high performance, low power consumption, compact size, compatibility with certain protocols, etc.

  4. Q: In which technical solutions can S-873377AUP-0AAT2G be used? A: S-873377AUP-0AAT2G can be used in a wide range of technical solutions such as IoT devices, industrial automation systems, consumer electronics, medical equipment, etc.

  5. Q: How does S-873377AUP-0AAT2G integrate into a technical solution? A: S-873377AUP-0AAT2G can be integrated into a technical solution by connecting it to other components or devices through appropriate interfaces or communication protocols.

  6. Q: Are there any specific requirements for using S-873377AUP-0AAT2G in a technical solution? A: Yes, there might be specific requirements such as voltage levels, operating temperature range, signal compatibility, or software/firmware configurations that need to be considered when using S-873377AUP-0AAT2G.

  7. Q: Can S-873377AUP-0AAT2G be used in both prototype and production stages of a technical solution? A: Yes, S-873377AUP-0AAT2G can be used in both prototype and production stages, depending on the specific requirements and scalability of the technical solution.

  8. Q: Is there any documentation available for S-873377AUP-0AAT2G? A: Yes, manufacturers usually provide datasheets, application notes, and other technical documentation for S-873377AUP-0AAT2G, which can help in understanding its usage and integration.

  9. Q: Are there any known limitations or considerations when using S-873377AUP-0AAT2G? A: It's important to review the manufacturer's documentation for any known limitations, such as maximum operating conditions, recommended usage guidelines, or potential compatibility issues with other components.

  10. Q: Where can I purchase S-873377AUP-0AAT2G? A: S-873377AUP-0AAT2G can be purchased from authorized distributors, online electronics stores, or directly from the manufacturer's website.