Diodes Incorporated
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
AP2127K-1.8TRG1
Ver Detalle Hojas de datos

AP2127K-1.8TRG1

Product Overview

Category

AP2127K-1.8TRG1 belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation: AP2127K-1.8TRG1 ensures a stable output voltage regardless of input fluctuations.
  • Efficiency: It operates with high efficiency, minimizing power loss.
  • Low dropout voltage: The regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Overcurrent protection: It includes built-in protection mechanisms to prevent damage due to excessive current flow.
  • Thermal shutdown: In case of overheating, the regulator automatically shuts down to avoid damage.

Package

AP2127K-1.8TRG1 is available in a compact surface-mount package.

Essence

The essence of AP2127K-1.8TRG1 lies in its ability to provide reliable and stable voltage regulation for various electronic applications.

Packaging/Quantity

This product is typically packaged in reels or tubes, containing a specific quantity per package. Please refer to the manufacturer's specifications for detailed packaging information.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Maximum Output Current: 300mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

AP2127K-1.8TRG1 has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage Regulation: AP2127K-1.8TRG1 maintains a constant output voltage of 1.8V, regardless of input voltage variations.
  • Low Dropout Voltage: The regulator can operate with a minimal voltage difference between the input and output, ensuring efficient power conversion.
  • Overcurrent Protection: It includes protection mechanisms to prevent damage caused by excessive current flow.
  • Thermal Shutdown: In case of overheating, the regulator automatically shuts down to protect itself from damage.

Advantages and Disadvantages

Advantages

  • Provides stable and regulated output voltage.
  • High efficiency operation.
  • Compact package size.
  • Built-in overcurrent protection.
  • Thermal shutdown feature for added safety.

Disadvantages

  • Limited maximum output current (300mA).
  • Requires an input voltage within the specified range (2.5V - 6.0V).

Working Principles

AP2127K-1.8TRG1 operates based on the principle of linear voltage regulation. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage of 1.8V. The regulator utilizes various components such as transistors, resistors, and capacitors to achieve this voltage regulation.

Detailed Application Field Plans

AP2127K-1.8TRG1 finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Embedded systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to AP2127K-1.8TRG1 include: - AP2127K-1.5TRG1: Output voltage of 1.5V - AP2127K-2.5TRG1: Output voltage of 2.5V - AP2127K-3.3TRG1: Output voltage of 3.3V

These alternative models can be chosen based on specific voltage requirements for different applications.

Note: The content provided above is a general overview and may vary depending on the manufacturer's specifications and revisions.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de AP2127K-1.8TRG1 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of AP2127K-1.8TRG1 in technical solutions:

Q1: What is the AP2127K-1.8TRG1? A1: The AP2127K-1.8TRG1 is a voltage regulator IC (integrated circuit) that provides a fixed output voltage of 1.8V.

Q2: What are the typical applications of AP2127K-1.8TRG1? A2: The AP2127K-1.8TRG1 is commonly used in various electronic devices such as smartphones, tablets, portable media players, and other low-power applications.

Q3: What is the input voltage range for AP2127K-1.8TRG1? A3: The input voltage range for AP2127K-1.8TRG1 is typically between 2.5V and 6V.

Q4: What is the maximum output current of AP2127K-1.8TRG1? A4: The maximum output current of AP2127K-1.8TRG1 is 300mA.

Q5: Does AP2127K-1.8TRG1 require any external components for operation? A5: Yes, AP2127K-1.8TRG1 requires a few external components such as input and output capacitors for stability and filtering.

Q6: Can AP2127K-1.8TRG1 handle overcurrent or short-circuit conditions? A6: Yes, AP2127K-1.8TRG1 has built-in overcurrent and short-circuit protection features to safeguard the device and the connected circuitry.

Q7: Is AP2127K-1.8TRG1 suitable for battery-powered applications? A7: Yes, AP2127K-1.8TRG1 is well-suited for battery-powered applications due to its low quiescent current and efficient power conversion.

Q8: Can AP2127K-1.8TRG1 operate in a wide temperature range? A8: Yes, AP2127K-1.8TRG1 is designed to operate in a wide temperature range, typically from -40°C to +85°C.

Q9: Does AP2127K-1.8TRG1 have any thermal protection mechanism? A9: Yes, AP2127K-1.8TRG1 incorporates thermal shutdown protection to prevent overheating and damage to the device.

Q10: Is there any adjustable output version available for AP2127K series? A10: No, the AP2127K series only offers fixed output voltage options, including the AP2127K-1.8TRG1 with a fixed output voltage of 1.8V.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.