Consulte las especificaciones para obtener detalles del producto.
AP2127N-2.5TRG1
Product Overview
Category
AP2127N-2.5TRG1 belongs to the category of voltage regulators.
Use
It is commonly used to regulate and stabilize voltage in electronic circuits.
Characteristics
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 2.5V
- Maximum Output Current: 300mA
- Dropout Voltage: 200mV
- Low Quiescent Current: 50μA
- Low Shutdown Current: 0.1μA
- Thermal Shutdown Protection
- Short Circuit Protection
- Small Package Size
Package
AP2127N-2.5TRG1 is available in a small SOT-23-5 package.
Essence
The essence of AP2127N-2.5TRG1 is its ability to provide stable and regulated voltage output in various electronic applications.
Packaging/Quantity
It is typically packaged in reels, with each reel containing 3000 units of AP2127N-2.5TRG1.
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 2.5V
- Output Current: Up to 300mA
- Dropout Voltage: 200mV
- Quiescent Current: 50μA
- Shutdown Current: 0.1μA
- Operating Temperature Range: -40°C to +85°C
- Package Type: SOT-23-5
Detailed Pin Configuration
AP2127N-2.5TRG1 has a total of five pins:
- VIN (Pin 1): Input voltage pin.
- GND (Pin 2): Ground reference pin.
- EN (Pin 3): Enable pin for turning the regulator on/off.
- FB (Pin 4): Feedback pin for setting the output voltage.
- VOUT (Pin 5): Output voltage pin.
Functional Features
- Wide input voltage range allows flexibility in various applications.
- Low dropout voltage ensures efficient regulation even with low input voltages.
- Low quiescent current minimizes power consumption during standby or idle states.
- Thermal shutdown protection prevents damage due to excessive heat.
- Short circuit protection safeguards the regulator and connected components.
Advantages and Disadvantages
Advantages
- Small package size enables space-saving designs.
- Wide input voltage range provides versatility.
- Low quiescent current reduces power consumption.
- Thermal shutdown and short circuit protection enhance reliability.
Disadvantages
- Limited maximum output current of 300mA may not be suitable for high-power applications.
- Dropout voltage of 200mV may affect efficiency in certain scenarios.
Working Principles
AP2127N-2.5TRG1 operates based on a linear voltage regulation principle. It takes an input voltage within the specified range and regulates it to a stable 2.5V output. The feedback pin (FB) is used to set the desired output voltage, while the enable pin (EN) controls the on/off state of the regulator. The internal circuitry ensures that the output voltage remains constant despite variations in the input voltage.
Detailed Application Field Plans
AP2127N-2.5TRG1 finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models to AP2127N-2.5TRG1 include: - AP2127N-3.3TRG1: Output voltage of 3.3V - AP2127N-1.8TRG1: Output voltage of 1.8V - AP2127N-ADJTRG1: Adjustable output voltage
These alternative models provide different output voltage options to suit specific application requirements.
Word count: 409 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de AP2127N-2.5TRG1 en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of AP2127N-2.5TRG1 in technical solutions:
Q1: What is AP2127N-2.5TRG1? A1: AP2127N-2.5TRG1 is a voltage regulator IC (Integrated Circuit) that provides a fixed output voltage of 2.5V.
Q2: What are the typical applications of AP2127N-2.5TRG1? A2: AP2127N-2.5TRG1 is commonly used in various electronic devices, such as power supplies, battery-powered systems, and portable devices.
Q3: What is the input voltage range for AP2127N-2.5TRG1? A3: The input voltage range for AP2127N-2.5TRG1 is typically between 2.7V and 6V.
Q4: What is the maximum output current of AP2127N-2.5TRG1? A4: AP2127N-2.5TRG1 can provide a maximum output current of 150mA.
Q5: Does AP2127N-2.5TRG1 require any external components for operation? A5: Yes, AP2127N-2.5TRG1 requires a few external components, such as input and output capacitors, for stable operation.
Q6: Can AP2127N-2.5TRG1 handle overcurrent or short-circuit conditions? A6: Yes, AP2127N-2.5TRG1 has built-in overcurrent and short-circuit protection features to safeguard the device and the connected circuitry.
Q7: Is AP2127N-2.5TRG1 suitable for low-power applications? A7: Yes, AP2127N-2.5TRG1 is designed for low-power applications and offers high efficiency with low quiescent current.
Q8: Can AP2127N-2.5TRG1 operate in a wide temperature range? A8: Yes, AP2127N-2.5TRG1 has a wide operating temperature range of -40°C to +85°C, making it suitable for various environments.
Q9: Does AP2127N-2.5TRG1 have any shutdown or enable feature? A9: No, AP2127N-2.5TRG1 does not have a shutdown or enable feature. It operates continuously once powered.
Q10: Is there any recommended layout or PCB design consideration for AP2127N-2.5TRG1? A10: Yes, the datasheet of AP2127N-2.5TRG1 provides guidelines for the recommended layout and PCB design to ensure proper performance and stability.
Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult the manufacturer for detailed information and support.