AP2204K-5.0TRG1

Product Overview

Category

AP2204K-5.0TRG1 belongs to the category of voltage regulators.

Use

This product is commonly used for regulating voltage in electronic circuits.

Characteristics

• Package: The AP2204K-5.0TRG1 comes in a compact surface-mount package.
• Essence: It is designed to provide stable and regulated output voltage.
• Packaging/Quantity: The product is typically packaged in reels or tubes, with varying quantities depending on the supplier.

Specifications

The specifications of AP2204K-5.0TRG1 are as follows:

• Input Voltage Range: 2.5V - 6.0V
• Output Voltage: 5.0V
• Output Current: Up to 200mA
• Dropout Voltage: 300mV (typical)
• Quiescent Current: 50µA (typical)
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The pin configuration of AP2204K-5.0TRG1 is as follows:

```

---

| | --| VIN GND |-- --| VOUT EN |-- |___________| ```

• VIN: Input voltage pin
• GND: Ground pin
• VOUT: Output voltage pin
• EN: Enable pin (used for enabling/disabling the regulator)

Functional Features

The AP2204K-5.0TRG1 offers the following functional features:

• Low dropout voltage: The regulator can operate with a small voltage difference between the input and output.
• Low quiescent current: It consumes minimal current when in standby mode, resulting in improved energy efficiency.
• Overcurrent protection: The device includes built-in protection against excessive output current.
• Thermal shutdown: It has a thermal protection mechanism that shuts down the regulator in case of excessive temperature.

Advantages and Disadvantages

Advantages: - Compact package size - Wide input voltage range - Low dropout voltage - Overcurrent and thermal protection

Disadvantages: - Limited output current capacity (up to 200mA)

Working Principles

The AP2204K-5.0TRG1 operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The enable pin allows for easy control of the regulator's operation.

Detailed Application Field Plans

AP2204K-5.0TRG1 finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Consumer electronics

Alternative Models

Some alternative models that offer similar functionality to AP2204K-5.0TRG1 include: - LM1117-5.0 - MCP1700-5002E/TO - TS2950CT-5.0

These alternatives can be considered based on specific requirements and availability.

In conclusion, AP2204K-5.0TRG1 is a voltage regulator with a compact package, wide input voltage range, and low dropout voltage. It offers overcurrent and thermal protection, making it suitable for various applications in the field of electronics.