Diodes Incorporated
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
AP2213D-3.3TRE1
Ver Detalle Hojas de datos

AP2213D-3.3TRE1

Product Overview

Category

AP2213D-3.3TRE1 belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact package size
  • Low power consumption
  • High efficiency

Package

AP2213D-3.3TRE1 is available in a small surface-mount package.

Essence

The essence of AP2213D-3.3TRE1 lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

AP2213D-3.3TRE1 has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: AP2213D-3.3TRE1 ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: The device automatically shuts down when the temperature exceeds a certain threshold, preventing damage due to overheating.
  • Enable control: The enable pin allows for easy on/off control of the regulator.

Advantages and Disadvantages

Advantages

  • Compact size enables easy integration into space-constrained designs.
  • Low power consumption helps conserve energy.
  • High efficiency minimizes power loss during voltage regulation.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage of 200mV may affect performance in low input voltage scenarios.

Working Principles

AP2213D-3.3TRE1 operates based on the principle of linear voltage regulation. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of input voltage variations.

Detailed Application Field Plans

AP2213D-3.3TRE1 finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Embedded systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to AP2213D-3.3TRE1 include: - AP2213D-5.0TRE1: Provides a regulated output voltage of 5.0V. - AP2213D-2.8TRE1: Offers a regulated output voltage of 2.8V. - AP2213D-ADJ: Allows for adjustable output voltage within a specified range.

These alternative models can be considered based on specific application requirements and desired output voltage levels.

Word count: 408 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de AP2213D-3.3TRE1 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of AP2213D-3.3TRE1 in technical solutions:

Q1: What is AP2213D-3.3TRE1? A1: AP2213D-3.3TRE1 is a specific model of voltage regulator IC (integrated circuit) used for power management in various electronic devices.

Q2: What is the input voltage range of AP2213D-3.3TRE1? A2: The input voltage range of AP2213D-3.3TRE1 is typically between 2.5V and 6V.

Q3: What is the output voltage of AP2213D-3.3TRE1? A3: AP2213D-3.3TRE1 provides a fixed output voltage of 3.3V.

Q4: What is the maximum output current of AP2213D-3.3TRE1? A4: The maximum output current of AP2213D-3.3TRE1 is typically around 500mA.

Q5: What are the typical applications of AP2213D-3.3TRE1? A5: AP2213D-3.3TRE1 is commonly used in battery-powered devices, portable electronics, IoT (Internet of Things) devices, and other low-power applications.

Q6: Does AP2213D-3.3TRE1 require any external components for operation? A6: Yes, AP2213D-3.3TRE1 requires a few external components such as input/output capacitors and resistors for stability and proper functioning.

Q7: Can AP2213D-3.3TRE1 handle input voltage fluctuations? A7: Yes, AP2213D-3.3TRE1 has built-in features like voltage regulation and thermal shutdown protection to handle input voltage fluctuations.

Q8: Is AP2213D-3.3TRE1 suitable for low-power applications? A8: Yes, AP2213D-3.3TRE1 is designed specifically for low-power applications, making it an ideal choice for such scenarios.

Q9: Can AP2213D-3.3TRE1 operate in a wide temperature range? A9: Yes, AP2213D-3.3TRE1 is designed to operate reliably in a wide temperature range, typically from -40°C to 85°C.

Q10: Are there any recommended PCB layout guidelines for using AP2213D-3.3TRE1? A10: Yes, the datasheet of AP2213D-3.3TRE1 provides recommended PCB layout guidelines to ensure proper performance and minimize noise interference.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with technical experts for accurate information.