Consulte las especificaciones para obtener detalles del producto.
AZ1085T-5.0E1
Product Overview
Category
AZ1085T-5.0E1 belongs to the category of voltage regulators.
Use
This product is commonly used in electronic circuits to regulate and stabilize voltage levels.
Characteristics
- Voltage Output: 5.0V
- Package Type: TO-220
- Essence: Linear voltage regulator
- Packaging/Quantity: Available in reels or tubes, quantity varies based on manufacturer
Specifications
The specifications for AZ1085T-5.0E1 are as follows:
- Input Voltage Range: 7V to 25V
- Output Voltage: 5.0V
- Output Current: Up to 3A
- Dropout Voltage: 1.5V (typical)
- Line Regulation: 0.2% (typical)
- Load Regulation: 0.4% (typical)
- Operating Temperature Range: -40°C to +125°C
- Package: TO-220
Detailed Pin Configuration
AZ1085T-5.0E1 has three pins:
- Vin (Pin 1): Input voltage pin
- Vout (Pin 2): Output voltage pin
- GND (Pin 3): Ground pin
Functional Features
- High accuracy and low dropout voltage
- Overcurrent and thermal protection
- Fast transient response
- Adjustable output voltage with external resistors
Advantages and Disadvantages
Advantages
- Stable and regulated output voltage
- Wide input voltage range
- Protection against overcurrent and thermal issues
- Suitable for various applications
Disadvantages
- Higher power dissipation compared to switching regulators
- Limited output current capacity
Working Principles
AZ1085T-5.0E1 operates on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage based on the input voltage and load conditions. The internal circuitry compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output.
Detailed Application Field Plans
AZ1085T-5.0E1 finds applications in various electronic devices and systems, including but not limited to: - Power supplies - Battery chargers - Audio amplifiers - Industrial control systems - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to AZ1085T-5.0E1 are: - LM317 - LT1085 - LM7805 - LM1117
These models offer similar functionality and can be used as substitutes depending on specific requirements.
In conclusion, AZ1085T-5.0E1 is a voltage regulator widely used in electronic circuits to provide a stable and regulated 5.0V output. Its high accuracy, low dropout voltage, and protection features make it suitable for various applications in different industries.
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de AZ1085T-5.0E1 en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of AZ1085T-5.0E1 in technical solutions:
Q1: What is AZ1085T-5.0E1? A1: AZ1085T-5.0E1 is a voltage regulator IC that provides a fixed output voltage of 5.0V.
Q2: What is the input voltage range for AZ1085T-5.0E1? A2: The input voltage range for AZ1085T-5.0E1 is typically between 6.5V and 25V.
Q3: What is the maximum output current of AZ1085T-5.0E1? A3: The maximum output current of AZ1085T-5.0E1 is 3A.
Q4: Can AZ1085T-5.0E1 be used in both step-up and step-down applications? A4: No, AZ1085T-5.0E1 is a linear voltage regulator and can only be used for step-down applications.
Q5: What is the dropout voltage of AZ1085T-5.0E1? A5: The dropout voltage of AZ1085T-5.0E1 is typically around 1.5V.
Q6: Is AZ1085T-5.0E1 suitable for low-power applications? A6: No, AZ1085T-5.0E1 is designed for medium to high power applications due to its high output current capability.
Q7: Does AZ1085T-5.0E1 require any external components for operation? A7: Yes, AZ1085T-5.0E1 requires input and output capacitors for stability and proper operation.
Q8: Can AZ1085T-5.0E1 handle short-circuit conditions? A8: Yes, AZ1085T-5.0E1 has built-in current limiting and thermal shutdown protection to handle short-circuit conditions.
Q9: What is the typical efficiency of AZ1085T-5.0E1? A9: The typical efficiency of AZ1085T-5.0E1 is around 80-90%, depending on the input and output voltage differentials.
Q10: Can AZ1085T-5.0E1 be used in automotive applications? A10: Yes, AZ1085T-5.0E1 is suitable for automotive applications as it can operate over a wide temperature range and has built-in protection features.
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.