Consulte las especificaciones para obtener detalles del producto.
AZ1086T-3.3E1
Product Overview
Category
AZ1086T-3.3E1 belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Current limiting and thermal shutdown protection
- Adjustable output voltage
- Wide input voltage range
Package
AZ1086T-3.3E1 is available in a TO-220 package.
Essence
The essence of AZ1086T-3.3E1 is its ability to provide stable and regulated voltage output in various electronic applications.
Packaging/Quantity
It is typically packaged in reels or tubes, with quantities varying based on customer requirements.
Specifications
- Input Voltage Range: 4.5V to 20V
- Output Voltage: 3.3V
- Dropout Voltage: 1.2V (typical)
- Maximum Output Current: 1.5A
- Line Regulation: ±0.2%
- Load Regulation: ±0.4%
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
AZ1086T-3.3E1 has three pins:
- Vin (Input Voltage): Connects to the power supply input.
- Vout (Output Voltage): Provides the regulated output voltage.
- GND (Ground): Common reference point for the circuit.
Functional Features
- Voltage Regulation: AZ1086T-3.3E1 ensures a stable output voltage regardless of input voltage fluctuations.
- Current Limiting: It protects the circuit by limiting the maximum output current.
- Thermal Shutdown Protection: In case of excessive temperature, it shuts down to prevent damage.
- Adjustable Output Voltage: The output voltage can be adjusted using external resistors.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures reliable performance.
- Low dropout voltage minimizes power dissipation.
- Current limiting and thermal shutdown protection enhance circuit safety.
- Adjustable output voltage provides flexibility in various applications.
Disadvantages
- Relatively higher cost compared to some other voltage regulators.
- Requires additional external components for proper operation.
Working Principles
AZ1086T-3.3E1 operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. The device continuously monitors the input voltage, output voltage, and temperature to ensure accurate regulation.
Detailed Application Field Plans
AZ1086T-3.3E1 finds extensive use in various electronic applications, including but not limited to: - Power supplies - Battery-powered devices - Industrial control systems - Automotive electronics - Audio amplifiers
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to AZ1086T-3.3E1 are: - LM317 - LT1086 - LM1117 - ADJ1117
These models offer similar functionality and can be used as substitutes depending on specific requirements.
In conclusion, AZ1086T-3.3E1 is a voltage regulator known for its high precision, low dropout voltage, and adjustable output voltage. It provides stable voltage regulation in various electronic applications. While it has advantages such as current limiting and thermal shutdown protection, it also has some disadvantages like higher cost and additional external component requirements. Its working principle involves feedback control to maintain a stable output voltage. It is widely used in power supplies, battery-powered devices, industrial control systems, automotive electronics, and audio amplifiers. Alternative models such as LM317, LT1086, LM1117, and ADJ1117 can be considered based on specific needs.
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de AZ1086T-3.3E1 en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of AZ1086T-3.3E1 in technical solutions:
Q1: What is AZ1086T-3.3E1? A1: AZ1086T-3.3E1 is a voltage regulator IC (integrated circuit) that provides a fixed output voltage of 3.3V.
Q2: What are the typical applications of AZ1086T-3.3E1? A2: AZ1086T-3.3E1 is commonly used in various electronic devices and systems where a stable 3.3V power supply is required, such as microcontrollers, sensors, and communication modules.
Q3: What is the input voltage range for AZ1086T-3.3E1? A3: The input voltage range for AZ1086T-3.3E1 is typically between 4.5V and 20V.
Q4: What is the maximum output current of AZ1086T-3.3E1? A4: The maximum output current of AZ1086T-3.3E1 is 1.5A, which means it can provide up to 1.5 Amps of current at the regulated 3.3V output.
Q5: Does AZ1086T-3.3E1 require any external components for operation? A5: Yes, AZ1086T-3.3E1 requires a few external components, such as input and output capacitors, to ensure stability and proper operation.
Q6: Can AZ1086T-3.3E1 handle overcurrent or short-circuit conditions? A6: Yes, AZ1086T-3.3E1 has built-in protection features like current limiting and thermal shutdown to protect against overcurrent and short-circuit conditions.
Q7: What is the dropout voltage of AZ1086T-3.3E1? A7: The dropout voltage of AZ1086T-3.3E1 is typically around 1.3V, which means the input voltage must be at least 1.3V higher than the desired output voltage for proper regulation.
Q8: Can AZ1086T-3.3E1 operate in a wide temperature range? A8: Yes, AZ1086T-3.3E1 is designed to operate in a wide temperature range, typically from -40°C to +125°C.
Q9: Is AZ1086T-3.3E1 available in different package options? A9: Yes, AZ1086T-3.3E1 is available in various package options, such as TO-220, SOT-223, and DPAK, allowing flexibility in design and mounting.
Q10: Are there any specific precautions to consider when using AZ1086T-3.3E1? A10: It is important to follow the manufacturer's datasheet and application notes for proper usage. Some precautions include ensuring proper heat dissipation, avoiding excessive input voltage, and providing adequate decoupling capacitors for stability.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements of AZ1086T-3.3E1.