AZ1117CR-1.8TRG1 belongs to the category of voltage regulators.
This product is commonly used in electronic circuits to regulate and stabilize voltage levels.
The specifications for AZ1117CR-1.8TRG1 are as follows:
AZ1117CR-1.8TRG1 has the following pin configuration:
AZ1117CR-1.8TRG1 operates on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The internal circuitry compares the reference voltage with the feedback voltage to maintain a constant output voltage.
AZ1117CR-1.8TRG1 finds applications in various electronic devices and systems, including:
Some alternative models to AZ1117CR-1.8TRG1 include:
These models offer similar functionality and can be used as alternatives depending on specific requirements.
In conclusion, AZ1117CR-1.8TRG1 is a voltage regulator that provides stable and regulated output voltage for various electronic applications. Its low dropout voltage, high accuracy, and protection features make it suitable for a wide range of low-power devices. However, it has limitations in terms of input voltage range and heat generation during operation.
Sure! Here are 10 common questions and answers related to the application of AZ1117CR-1.8TRG1 in technical solutions:
Q1: What is AZ1117CR-1.8TRG1? A1: AZ1117CR-1.8TRG1 is a low dropout voltage regulator that provides a fixed output voltage of 1.8V.
Q2: What is the maximum input voltage for AZ1117CR-1.8TRG1? A2: The maximum input voltage for AZ1117CR-1.8TRG1 is 15V.
Q3: What is the dropout voltage of AZ1117CR-1.8TRG1? A3: The dropout voltage of AZ1117CR-1.8TRG1 is typically around 1.1V at a load current of 800mA.
Q4: What is the maximum output current of AZ1117CR-1.8TRG1? A4: The maximum output current of AZ1117CR-1.8TRG1 is 1A.
Q5: Can AZ1117CR-1.8TRG1 be used in battery-powered applications? A5: Yes, AZ1117CR-1.8TRG1 can be used in battery-powered applications as it has a low quiescent current and low dropout voltage.
Q6: Is AZ1117CR-1.8TRG1 suitable for use in automotive applications? A6: Yes, AZ1117CR-1.8TRG1 is suitable for use in automotive applications as it meets the AEC-Q100 standard.
Q7: Does AZ1117CR-1.8TRG1 have built-in thermal shutdown protection? A7: Yes, AZ1117CR-1.8TRG1 has built-in thermal shutdown protection to prevent overheating.
Q8: Can AZ1117CR-1.8TRG1 be used in both positive and negative voltage applications? A8: No, AZ1117CR-1.8TRG1 is designed for positive voltage applications only.
Q9: What is the operating temperature range of AZ1117CR-1.8TRG1? A9: The operating temperature range of AZ1117CR-1.8TRG1 is -40°C to +125°C.
Q10: Does AZ1117CR-1.8TRG1 require any external components for operation? A10: Yes, AZ1117CR-1.8TRG1 requires input and output capacitors for stability and proper operation.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.