EPCOS (TDK)
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
B72207S0950K211
Ver Detalle Hojas de datos

B72207S0950K211

Product Overview

Category

The B72207S0950K211 belongs to the category of varistors, which are electronic components used for suppressing voltage spikes and transient surges in electrical circuits.

Use

This varistor is commonly used in electronic devices and power distribution systems to protect sensitive components from voltage fluctuations and overvoltage conditions.

Characteristics

  • High energy absorption capacity
  • Fast response time
  • Wide operating temperature range
  • Compact size

Package

The B72207S0950K211 varistor is typically available in a cylindrical package with lead wires for easy integration into circuit boards.

Essence

The essence of this varistor lies in its ability to quickly divert excess voltage away from sensitive components, thereby safeguarding them from damage.

Packaging/Quantity

These varistors are usually packaged in reels or trays, with quantities varying based on the manufacturer's specifications.

Specifications

  • Voltage Rating: 95V
  • Maximum Allowable Voltage: 150V
  • Peak Current (8/20μs): 2500A
  • Energy (10/1000μs): 2.5J
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The B72207S0950K211 varistor typically has two lead wires for connection to the circuit board. The pin configuration may vary based on the manufacturer's design, but it generally follows a standard layout.

Functional Features

  • Voltage clamping during transient events
  • Rapid response to voltage spikes
  • Low leakage current under normal operating conditions

Advantages and Disadvantages

Advantages

  • Effective protection against voltage surges
  • Compact size for space-constrained applications
  • Wide operating temperature range

Disadvantages

  • Limited lifespan under continuous high-stress conditions
  • Sensitivity to extreme temperature variations

Working Principles

The varistor operates based on the principle of nonlinear resistance, where its resistance decreases as the applied voltage increases. This allows it to effectively shunt excess voltage away from the protected circuitry.

Detailed Application Field Plans

The B72207S0950K211 varistor finds extensive use in various applications, including: - Consumer electronics - Industrial automation - Power supplies - Telecommunications equipment - Automotive electronics

Detailed and Complete Alternative Models

  • B72207S101K101
  • B72207S151K101
  • B72207S200K101
  • B72207S250K101

In conclusion, the B72207S0950K211 varistor offers reliable overvoltage protection and is well-suited for a wide range of electronic applications.

[Word Count: 411]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de B72207S0950K211 en soluciones técnicas

  1. What is the B72207S0950K211 component used for in technical solutions?

    • The B72207S0950K211 is a varistor, commonly used for overvoltage protection in electronic circuits.

  2. What are the key specifications of the B72207S0950K211?

    • The B72207S0950K211 has a maximum AC voltage of 95V, a nominal diameter of 7mm, and a maximum surge current capability of 250A.

  3. How does the B72207S0950K211 provide overvoltage protection?

    • The B72207S0950K211 varistor acts as a voltage-dependent resistor, conducting excess voltage away from sensitive components to protect them from damage.

  4. In what applications is the B72207S0950K211 commonly used?

    • The B72207S0950K211 is frequently employed in power supplies, industrial equipment, telecommunications devices, and automotive electronics for overvoltage protection.

  5. What are the temperature and humidity operating ranges for the B72207S0950K211?

    • The B72207S0950K211 can typically operate within a temperature range of -40°C to +85°C and a relative humidity range of 85% at +25°C.

  6. What are the potential failure modes of the B72207S0950K211?

    • Common failure modes include thermal runaway, degradation due to excessive voltage or current, and mechanical damage from external stress.

  7. Can the B72207S0950K211 be used in high-frequency applications?

    • Yes, the B72207S0950K211 is suitable for high-frequency applications due to its low capacitance and fast response time.

  8. Are there any recommended soldering or mounting techniques for the B72207S0950K211?

    • It is advisable to follow the manufacturer's guidelines for soldering and mounting to ensure proper performance and reliability.

  9. What are the typical lifetimes and aging characteristics of the B72207S0950K211?

    • The B72207S0950K211 has a long operational lifetime and exhibits minimal aging under normal operating conditions.

  10. Where can I find detailed technical documentation for the B72207S0950K211?

    • Detailed technical specifications, application notes, and other relevant information can be found in the datasheet provided by the component manufacturer.