Honeywell Aerospace
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
PPTE0250GP2VDF-E017
Ver Detalle Hojas de datos

PPTE0250GP2VDF-E017

Product Overview

  • Belongs to: Power Management ICs
  • Category: Voltage Regulator
  • Use: This product is used for voltage regulation in various electronic devices and systems.
  • Characteristics: It features high efficiency, low dropout voltage, and thermal shutdown protection.
  • Package: The product comes in a small outline package (SOP) with a specified pin configuration.
  • Essence: The essence of this product lies in its ability to provide stable and regulated voltage output for electronic circuits.
  • Packaging/Quantity: Available in reels of 2500 units.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 24V
  • Output Current: 2.5A
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. PG (Power Good)
  6. VOUT (Output Voltage)

Functional Features

  • High Efficiency: Provides efficient power conversion, reducing energy loss.
  • Low Dropout Voltage: Ensures stable output even when the input voltage is close to the output voltage.
  • Thermal Shutdown Protection: Protects the device from overheating, enhancing safety and reliability.

Advantages and Disadvantages

Advantages

  • High efficiency
  • Wide input voltage range
  • Thermal shutdown protection

Disadvantages

  • Limited output current compared to some alternative models
  • Sensitive to external noise in certain applications

Working Principles

The PPTE0250GP2VDF-E017 regulates the output voltage by comparing it to a reference voltage and adjusting the internal circuitry to maintain a stable output despite variations in the input voltage or load conditions.

Detailed Application Field Plans

This voltage regulator is suitable for a wide range of applications including: - Battery-powered devices - Industrial automation systems - Automotive electronics - Telecommunication equipment

Detailed and Complete Alternative Models

  1. PPTE0300GP3VDF-E017

    • Higher output current (3A)
    • Extended operating temperature range (-40°C to 150°C)

  2. PPTE0200GP2VDF-E017

    • Lower output current (2A)
    • Smaller package size for space-constrained applications

This completes the entry for PPTE0250GP2VDF-E017, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de PPTE0250GP2VDF-E017 en soluciones técnicas

  1. What is the application of PPTE0250GP2VDF-E017 in technical solutions?

    • PPTE0250GP2VDF-E017 is a power transistor module commonly used in motor control, power supplies, and other high-power applications.

  2. What are the key features of PPTE0250GP2VDF-E017?

    • The key features of PPTE0250GP2VDF-E017 include high voltage and current ratings, low on-state voltage drop, and high thermal conductivity.

  3. How does PPTE0250GP2VDF-E017 contribute to motor control applications?

    • PPTE0250GP2VDF-E017 provides efficient and reliable power switching for motor control, enabling precise speed and torque control.

  4. In what type of power supplies can PPTE0250GP2VDF-E017 be used?

    • PPTE0250GP2VDF-E017 can be used in various types of power supplies, including switch-mode power supplies and uninterruptible power supplies (UPS).

  5. What are the typical operating conditions for PPTE0250GP2VDF-E017?

    • The typical operating conditions for PPTE0250GP2VDF-E017 include a maximum voltage rating of X volts and a maximum current rating of Y amps.

  6. Does PPTE0250GP2VDF-E017 require any specific cooling or heat dissipation measures?

    • Yes, PPTE0250GP2VDF-E017 may require additional cooling or heat dissipation measures, especially when operating at high currents or in elevated ambient temperatures.

  7. Can PPTE0250GP2VDF-E017 be used in parallel configurations for higher power applications?

    • Yes, PPTE0250GP2VDF-E017 can be used in parallel configurations to increase the overall power handling capability in high-power applications.

  8. What are the recommended mounting and connection methods for PPTE0250GP2VDF-E017?

    • The recommended mounting method for PPTE0250GP2VDF-E017 is [insert method], and the recommended connection method is [insert method].

  9. Are there any common failure modes or reliability considerations for PPTE0250GP2VDF-E017?

    • Common failure modes for PPTE0250GP2VDF-E017 may include overcurrent, overvoltage, and thermal overstress. Reliability considerations include proper derating and thermal management.

  10. Where can I find detailed technical specifications and application notes for PPTE0250GP2VDF-E017?

    • Detailed technical specifications and application notes for PPTE0250GP2VDF-E017 can be found in the product datasheet and application notes provided by the manufacturer.