5P49V6901A000NLGI

Basic Information Overview

• Category: Electronic Component
• Use: Clock Generator and Jitter Attenuator
• Characteristics:
  • High precision and low jitter output
  • Wide frequency range
  • Programmable features
• Package: QFN (Quad Flat No-leads)
• Essence: Integrated circuit for clock generation and jitter attenuation
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications and Parameters

• Frequency Range: 1 MHz to 700 MHz
• Output Type: LVPECL, LVDS, HCSL
• Supply Voltage: 2.5 V to 3.3 V
• Operating Temperature Range: -40°C to +85°C

Detailed and Complete Pin Configuration

The 5P49V6901A000NLGI has a total of 32 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VDD | Power supply voltage input | | 2 | GND | Ground | | 3 | XIN | Crystal oscillator input | | 4 | XOUT | Crystal oscillator output | | 5 | CLK1 | Output clock 1 | | 6 | CLK2 | Output clock 2 | | ... | ... | ... | | 32 | VDD | Power supply voltage input |

Functional Characteristics

• Clock Generation: The 5P49V6901A000NLGI can generate multiple output clocks with programmable frequencies.
• Jitter Attenuation: It reduces the amount of jitter in the generated clocks, resulting in more stable and accurate timing signals.
• Programmable Features: The device offers various programmable options such as frequency selection, output format, and output enable/disable.

Advantages and Disadvantages

Advantages: - High precision and low jitter output - Wide frequency range for versatile applications - Programmable features allow customization

Disadvantages: - Requires external crystal oscillator for clock input - Limited operating temperature range (-40°C to +85°C)

Applicable Range of Products

The 5P49V6901A000NLGI is suitable for use in various electronic systems that require precise clock generation and jitter attenuation. It finds applications in telecommunications, networking, data centers, and consumer electronics.

Working Principles

The device utilizes a combination of phase-locked loop (PLL) and voltage-controlled oscillator (VCO) techniques to generate stable and accurate clock signals. It also incorporates jitter attenuation circuits to minimize timing errors caused by noise and interference.

Detailed Application Field Plans

The 5P49V6901A000NLGI can be used in the following application fields: 1. Telecommunications: Clock synchronization in communication networks. 2. Networking: Timing solutions for routers, switches, and network equipment. 3. Data Centers: Clock distribution and synchronization in server farms. 4. Consumer Electronics: Clock generation for audio/video devices, gaming consoles, and set-top boxes.

Detailed Alternative Models

Some alternative models to the 5P49V6901A000NLGI include: - 5P49V6901B000NLGI: Similar functionality with additional features. - 5P49V6902A000NLGI: Higher frequency range with similar characteristics. - 5P49V6903A000NLGI: Lower power consumption variant.

5 Common Technical Questions and Answers

1. Q: What is the maximum frequency that can be generated by the 5P49V6901A000NLGI? A: The device can generate clocks with frequencies up to 700 MHz.

2. Q: Can I use a different package for this component? A: No, the 5P49V6901A000NLGI is only available in the QFN package.

3. Q: What is the typical jitter performance of this device? A: The device offers low jitter performance, typically below 1 ps RMS.

4. Q: Is an external crystal oscillator required for clock generation? A: Yes, the device requires an external crystal oscillator as the clock input.

5. Q: Can I program the output format of the clocks? A: Yes, the 5P49V6901A000NLGI supports multiple output formats such as LVPECL, LVDS, and HCSL.

This concludes the encyclopedia entry for the 5P49V6901A000NLGI.