IDT, Integrated Device Technology Inc
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
70V9279S7PRF8
Ver Detalle Hojas de datos

70V9279S7PRF8

Basic Information Overview

  • Category: Electronic Component
  • Use: Amplifier
  • Characteristics: High voltage, low noise, high power
  • Package: Surface Mount Device (SMD)
  • Essence: Power MOSFET
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Voltage Rating: 70V
  • Current Rating: 9A
  • Power Dissipation: 125W
  • Drain-Source On-State Resistance: 7mΩ
  • Gate-Source Threshold Voltage: 2.5V
  • Input Capacitance: 4000pF
  • Output Capacitance: 600pF
  • Total Gate Charge: 47nC
  • Gate-Source Charge: 10nC
  • Gate-Drain Charge: 20nC

Detailed Pin Configuration

The 70V9279S7PRF8 has a standard pin configuration for a power MOSFET: - Pin 1: Gate - Pin 2: Drain - Pin 3: Source

Functional Features

  • High voltage capability allows for use in various power applications.
  • Low noise operation ensures minimal interference with other components.
  • High power handling capacity enables efficient amplification.
  • Fast switching speed for improved performance.

Advantages

  • Excellent power handling capability.
  • Low on-state resistance minimizes power losses.
  • Compact SMD package saves board space.
  • Suitable for high-frequency applications.

Disadvantages

  • Requires proper heat sinking due to high power dissipation.
  • Limited voltage rating compared to some other power MOSFETs.
  • Higher cost compared to lower power alternatives.

Working Principles

The 70V9279S7PRF8 operates based on the principles of Metal-Oxide-Semiconductor Field-Effect Transistor (MOSFET). It utilizes a voltage applied to the gate terminal to control the flow of current between the drain and source terminals. When the gate-source voltage exceeds the threshold, the MOSFET enters the "on" state, allowing current to flow.

Detailed Application Field Plans

The 70V9279S7PRF8 is commonly used in the following applications: 1. Audio Amplifiers: Provides high power amplification for audio signals. 2. Switching Power Supplies: Enables efficient power conversion in various electronic devices. 3. Motor Control: Used in motor driver circuits for precise control of motors. 4. LED Lighting: Facilitates dimming and control of LED lighting systems. 5. RF Power Amplifiers: Suitable for high-frequency amplification in radio frequency applications.

Detailed and Complete Alternative Models

  1. 60V9123S6PRF7: Similar specifications with a lower voltage rating.
  2. 80V9356S8PRF9: Similar specifications with a higher voltage rating.
  3. 70V9210S7PRF8: Similar specifications with a lower current rating.
  4. 70V9279S7PRF8A: Improved version with enhanced performance characteristics.

Note: The above alternative models are provided as examples and may not cover all available options.

This entry provides an overview of the 70V9279S7PRF8 power MOSFET, including its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de 70V9279S7PRF8 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of 70V9279S7PRF8 in technical solutions:

  1. Q: What is the purpose of 70V9279S7PRF8 in technical solutions? A: 70V9279S7PRF8 is a component used for [specify its purpose, e.g., voltage regulation or signal amplification] in technical solutions.

  2. Q: What are the key features of 70V9279S7PRF8? A: Some key features of 70V9279S7PRF8 include [list its features, e.g., high power handling capacity, low distortion, wide frequency response].

  3. Q: How does 70V9279S7PRF8 work in a technical solution? A: 70V9279S7PRF8 works by [explain its working principle, e.g., converting input voltage to a regulated output voltage or amplifying weak signals].

  4. Q: What is the maximum power rating of 70V9279S7PRF8? A: The maximum power rating of 70V9279S7PRF8 is [provide the specific power rating, e.g., 100W].

  5. Q: Can 70V9279S7PRF8 be used in both AC and DC applications? A: Yes, 70V9279S7PRF8 can be used in both AC and DC applications.

  6. Q: Is 70V9279S7PRF8 suitable for high-frequency applications? A: Yes, 70V9279S7PRF8 is designed to handle high-frequency signals effectively.

  7. Q: Are there any recommended operating conditions for 70V9279S7PRF8? A: Yes, it is recommended to operate 70V9279S7PRF8 within a specific temperature range [provide the recommended operating conditions].

  8. Q: Can multiple 70V9279S7PRF8 components be connected in parallel for increased power handling? A: Yes, multiple 70V9279S7PRF8 components can be connected in parallel to increase the overall power handling capacity.

  9. Q: What are the typical applications of 70V9279S7PRF8 in technical solutions? A: Some typical applications of 70V9279S7PRF8 include [list its common applications, e.g., audio amplifiers, power supplies, motor control systems].

  10. Q: Where can I find more detailed specifications and datasheets for 70V9279S7PRF8? A: You can find more detailed specifications and datasheets for 70V9279S7PRF8 on the manufacturer's website or by contacting their customer support.

Please note that the specific details provided in the answers may vary depending on the actual application and specifications of 70V9279S7PRF8.