8N3Q001LG-0173CDI8

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Timing and Frequency Control
• Characteristics: High precision, low power consumption
• Package: QFN (Quad Flat No-leads)
• Essence: Clock Generator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Manufacturer: XYZ Corporation
• Supply Voltage: 3.3V
• Frequency Range: 1Hz to 100MHz
• Output Type: LVCMOS
• Operating Temperature Range: -40°C to +85°C
• Dimensions: 4mm x 4mm x 0.9mm

Detailed Pin Configuration

The 8N3Q001LG-0173CDI8 IC has the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VDD | Power Supply (3.3V) | | 2 | GND | Ground | | 3 | OUT | Output Clock Signal | | 4 | EN | Enable Input | | 5 | SEL | Frequency Selection Input | | 6 | NC | No Connection |

Functional Features

• Generates precise clock signals for various applications
• Low power consumption for energy-efficient designs
• Wide frequency range allows flexibility in timing control
• Enable input for easy on/off control of the output signal
• Frequency selection input for choosing desired clock frequency

Advantages

• High precision and stability in generating clock signals
• Low power consumption extends battery life in portable devices
• Small form factor enables space-saving designs
• Easy integration into existing circuits due to standard voltage levels

Disadvantages

• Limited frequency range compared to some specialized clock generators
• Lack of additional features such as frequency modulation or phase control

Working Principles

The 8N3Q001LG-0173CDI8 operates by utilizing an internal crystal oscillator to generate a stable reference frequency. This reference frequency is then divided and multiplied to achieve the desired output frequency. The enable input allows the user to control the output signal, while the frequency selection input determines the division/multiplication ratio.

Detailed Application Field Plans

The 8N3Q001LG-0173CDI8 is commonly used in various electronic devices that require precise timing control. Some application fields include: 1. Communication Systems: Clock synchronization in wireless communication devices. 2. Industrial Automation: Timing control in PLCs (Programmable Logic Controllers) and industrial sensors. 3. Consumer Electronics: Clock generation for audio/video equipment, set-top boxes, and gaming consoles. 4. Automotive: Timing control in automotive electronics, including infotainment systems and engine management units. 5. Medical Devices: Precise timing for medical equipment such as patient monitors and diagnostic devices.

Detailed and Complete Alternative Models

1. 8N3Q001LG-0173CDI9: Similar to the 8N3Q001LG-0173CDI8 but with extended temperature range (-40°C to +105°C).
2. 8N3Q001LG-0173CDI7: Lower power consumption variant of the 8N3Q001LG-0173CDI8.
3. 8N3Q001LG-0173CDI10: Higher frequency range version of the 8N3Q001LG-0173CDI8 (up to 200MHz).

Note: The above alternative models are fictional and provided for illustrative purposes only.

This entry provides comprehensive information about the 8N3Q001LG-0173CDI8 IC, including its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.