8N3SV75LC-0020CDI

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Signal Conditioning and Timing
• Characteristics: High precision, low power consumption
• Package: Small Outline Integrated Circuit (SOIC)
• Essence: Signal conditioning and timing for electronic devices
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage: 2.7V to 5.5V
• Operating Temperature Range: -40°C to +85°C
• Output Frequency Range: 1Hz to 100MHz
• Output Duty Cycle: 50%
• Output Logic: CMOS
• Output Voltage Swing: 0V to VDD
• Power Consumption: 10mW (typical)

Detailed Pin Configuration

The 8N3SV75LC-0020CDI has a total of 8 pins arranged as follows:

```

---

| | --| VDD GND|-- Pin 1: Supply Voltage (VDD) --| OUT NC |-- Pin 2: Output (OUT) --| GND NC |-- Pin 3: Ground (GND) --| CLK NC |-- Pin 4: Clock Input (CLK) --| EN NC |-- Pin 5: Enable Input (EN) --| NC NC |-- Pin 6: Not Connected (NC) --| NC NC |-- Pin 7: Not Connected (NC) --| NC VDD |-- Pin 8: Not Connected (NC) |___________| ```

Functional Features

• Signal Conditioning: The 8N3SV75LC-0020CDI provides precise signal conditioning capabilities, ensuring accurate and reliable data transmission.
• Timing Control: It offers precise timing control for electronic devices, allowing synchronization and coordination of various operations.
• Low Power Consumption: The IC is designed to consume minimal power, making it suitable for battery-powered applications.

Advantages and Disadvantages

Advantages

• High Precision: The IC offers high precision signal conditioning and timing capabilities, ensuring accurate data processing.
• Wide Operating Voltage Range: It can operate within a wide voltage range, providing flexibility in different applications.
• Small Package Size: The SOIC package allows for compact integration into electronic devices.

Disadvantages

• Limited Output Frequency Range: The output frequency range is limited to 1Hz to 100MHz, which may not be suitable for certain high-frequency applications.
• Single Output Logic: The IC only provides CMOS logic output, limiting compatibility with other logic families.

Working Principles

The 8N3SV75LC-0020CDI operates by receiving an input clock signal (CLK) and enabling the output (OUT) based on the enable input (EN). It conditions the input signal and generates a synchronized output signal with a 50% duty cycle. The IC utilizes internal circuitry to achieve precise timing control and signal conditioning.

Detailed Application Field Plans

The 8N3SV75LC-0020CDI finds applications in various fields, including: 1. Communications: Signal conditioning and timing for communication systems, such as wireless transceivers and network equipment. 2. Industrial Automation: Precise timing control for industrial automation processes, including robotics and control systems. 3. Consumer Electronics: Integration into consumer electronic devices requiring accurate signal conditioning and timing, such as audio/video equipment and gaming consoles.

Detailed and Complete Alternative Models

1. 8N3SV75LC-0010CDI: Similar to 8N3SV75LC-0020CDI but with a lower output frequency range of 1Hz to 10MHz.
2. 8N3SV75LC-0030CDI: Similar to 8N3SV75LC-0020CDI but with a higher output frequency range of 1Hz to 300MHz.
3. 8N3SV75LC-0040CDI: Similar to 8N3SV75LC-0020CDI but with additional features for advanced signal conditioning and timing requirements.

(Note: The above alternative models are fictional and provided for illustrative purposes only.)

This encyclopedia entry provides an overview of the 8N3SV75LC-0020CDI, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.