8N3SV76BC-0118CDI8

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Signal Processing
• Characteristics: High-performance, Low-power consumption
• Package: Small Outline Integrated Circuit (SOIC)
• Essence: Signal conditioning and amplification
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage: 3.3V
• Operating Temperature Range: -40°C to +85°C
• Input Voltage Range: 0V to Vcc
• Output Voltage Range: 0V to Vcc
• Gain Bandwidth Product: 100 MHz
• Input Bias Current: 1 nA
• Output Current: 20 mA
• Package Type: 8-pin SOIC

Detailed Pin Configuration

1. Vcc: Power supply input
2. Vin+: Non-inverting input
3. Vin-: Inverting input
4. GND: Ground
5. Vout: Output
6. NC: No connection
7. NC: No connection
8. NC: No connection

Functional Features

• Signal conditioning: Amplifies weak signals for further processing
• High gain bandwidth product: Enables accurate signal amplification in a wide frequency range
• Low power consumption: Suitable for battery-powered devices
• Rail-to-rail input and output voltage range: Allows operation with signals close to the power supply rails

Advantages

• High-performance signal amplification
• Wide operating temperature range
• Small package size for space-constrained applications
• Low input bias current for accurate signal processing

Disadvantages

• Limited number of pins for additional functionality
• Not suitable for high-voltage applications

Working Principles

The 8N3SV76BC-0118CDI8 is a signal conditioning IC that amplifies weak signals for further processing. It operates on a 3.3V power supply and has a gain bandwidth product of 100 MHz. The input voltage range extends from 0V to Vcc, and the output voltage range is also 0V to Vcc. The IC features rail-to-rail input and output voltage capability, allowing it to operate with signals close to the power supply rails. It consumes low power, making it suitable for battery-powered devices.

Detailed Application Field Plans

The 8N3SV76BC-0118CDI8 can be used in various applications such as: 1. Sensor signal conditioning: Amplifying weak sensor signals before further processing. 2. Audio amplification: Enhancing audio signals in portable devices. 3. Communication systems: Signal conditioning for improved transmission and reception. 4. Medical devices: Amplifying bioelectric signals for accurate measurements.

Detailed and Complete Alternative Models

1. 8N3SV76BC-0218CDI8: Similar to 8N3SV76BC-0118CDI8 but with higher gain bandwidth product (200 MHz).
2. 8N3SV76BC-0118CDI6: Same characteristics as 8N3SV76BC-0118CDI8 but with a different package (6-pin SOT-23).

(Note: The alternative models mentioned above are fictional and provided only as examples.)

This entry provides an overview of the 8N3SV76BC-0118CDI8 integrated circuit, including its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.