C164CM4EFABFXUMA1

Product Overview

• Category: Electronic Component
• Use: Integrated Circuit (IC)
• Characteristics: High-performance, multi-functional IC
• Package: Surface Mount Technology (SMT)
• Essence: Microcontroller unit with advanced features
• Packaging/Quantity: Tape and Reel, 1000 units per reel

Specifications

• Manufacturer: XYZ Corporation
• Model Number: C164CM4EFABFXUMA1
• Architecture: 16-bit
• CPU Speed: 40 MHz
• Flash Memory: 256 KB
• RAM: 32 KB
• Operating Voltage: 3.3V
• I/O Pins: 64
• Communication Interfaces: UART, SPI, I2C, CAN
• Timers/Counters: 6
• Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution
• Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The C164CM4EFABFXUMA1 has a total of 64 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VDD | Power Supply (3.3V) | | 2 | GND | Ground | | 3 | RESET | Reset Input | | 4 | P0.0 | General Purpose I/O | | ... | ... | ... | | 63 | P3.5 | General Purpose I/O | | 64 | XTAL1 | Crystal Oscillator Input |

Functional Features

• High-performance 16-bit microcontroller
• Advanced architecture for efficient processing
• Multiple communication interfaces for versatile connectivity
• Built-in timers/counters for precise timing operations
• Analog-to-Digital Converter (ADC) for accurate analog measurements
• Wide operating temperature range for various environments

Advantages and Disadvantages

Advantages

• High processing speed
• Ample flash memory for program storage
• Sufficient RAM for data handling
• Versatile communication interfaces
• Precise timing capabilities
• Accurate analog measurements
• Suitable for a wide range of applications

Disadvantages

• Limited I/O pins compared to some other microcontrollers
• Relatively higher power consumption

Working Principles

The C164CM4EFABFXUMA1 operates based on the 16-bit architecture, which allows it to process instructions efficiently. It executes programs stored in its flash memory and utilizes the available RAM for data storage and manipulation. The microcontroller communicates with external devices through its various communication interfaces such as UART, SPI, I2C, and CAN. It also incorporates timers/counters for precise timing operations and an ADC for analog measurements.

Detailed Application Field Plans

The C164CM4EFABFXUMA1 is suitable for a wide range of applications, including but not limited to:

1. Industrial Automation: Control systems, motor drives, PLCs
2. Automotive Electronics: Engine management, body control modules, infotainment systems
3. Consumer Electronics: Home appliances, gaming consoles, audio/video equipment
4. Internet of Things (IoT): Smart home devices, wearable technology, sensor networks
5. Medical Devices: Patient monitoring systems, diagnostic equipment, medical imaging

Detailed and Complete Alternative Models

1. C167CR-LM: Similar 16-bit microcontroller with enhanced peripherals
2. C166S V2: 16-bit microcontroller with extended temperature range
3. C165H: Low-power 16-bit microcontroller with integrated LCD driver
4. C161CS: Cost-effective 16-bit microcontroller for general-purpose applications
5. C163: High-performance 16-bit microcontroller with increased flash memory

Note: The above list is not exhaustive and there may be other alternative models available in the market.

This entry provides an overview of the C164CM4EFABFXUMA1, a high-performance 16-bit microcontroller with advanced features. It includes information about its specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.