XE164FM72F80LRABKXUMA1

Product Overview

• Category: Electronic Component
• Use: Microcontroller
• Characteristics: High performance, low power consumption
• Package: LRA package
• Essence: Advanced microcontroller for various applications
• Packaging/Quantity: Individually packaged, quantity varies based on order

Specifications

• Model Number: XE164FM72F80LRABKXUMA1
• Architecture: 16-bit
• Clock Frequency: 80 MHz
• Flash Memory: 72 KB
• RAM: 8 KB
• Operating Voltage: 3.3V
• I/O Pins: 64
• Communication Interfaces: UART, SPI, I2C, CAN
• Analog Inputs: 12-bit ADC with 8 channels
• Timers/Counters: Multiple timers/counters available
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XE164FM72F80LRABKXUMA1 microcontroller has a total of 64 I/O pins. The pin configuration is as follows:

• Pin 1: VDD (Power Supply)
• Pin 2: GND (Ground)
• Pin 3: P0.0
• Pin 4: P0.1
• Pin 5: P0.2
• ...
• Pin 64: P7.7

Functional Features

• High-performance 16-bit microcontroller suitable for various applications
• Low power consumption for energy-efficient designs
• Wide operating temperature range allows usage in extreme environments
• Multiple communication interfaces for easy integration with other devices
• On-chip analog-to-digital converter for precise measurements
• Abundant I/O pins for versatile connectivity
• Multiple timers/counters for accurate timing and event management

Advantages and Disadvantages

Advantages

• High performance and low power consumption combination
• Wide operating temperature range for extreme environments
• Abundant I/O pins provide flexibility in design
• Multiple communication interfaces enable easy integration
• On-chip analog-to-digital converter allows precise measurements

Disadvantages

• Limited flash memory (72 KB) and RAM (8 KB) compared to some other microcontrollers
• Not suitable for applications requiring higher clock frequencies

Working Principles

The XE164FM72F80LRABKXUMA1 microcontroller operates based on a 16-bit architecture. It executes instructions stored in its flash memory, utilizing the clock frequency of 80 MHz. The microcontroller communicates with external devices through various communication interfaces such as UART, SPI, I2C, and CAN. It also features an on-chip analog-to-digital converter for accurate measurement of analog signals. The microcontroller's working principles are based on its internal circuitry and firmware.

Detailed Application Field Plans

The XE164FM72F80LRABKXUMA1 microcontroller can be used in a wide range of applications, including but not limited to:

1. Industrial automation systems
2. Consumer electronics
3. Automotive electronics
4. Medical devices
5. Internet of Things (IoT) devices
6. Robotics
7. Home automation
8. Power management systems
9. Security systems
10. Sensor networks

Detailed and Complete Alternative Models

1. XE166FM72F80LRABKXUMA1: Similar to XE164FM72F80LRABKXUMA1 but with extended flash memory (128 KB) and RAM (16 KB).
2. XE162FM72F80LRABKXUMA1: Similar to XE164FM72F80LRABKXUMA1 but with reduced I/O pins (48) and flash memory (32 KB).
3. XE167FM72F80LRABKXUMA1: Similar to XE164FM72F80LRABKXUMA1 but with additional communication interfaces (Ethernet, USB).

These alternative models provide options with different specifications to cater to specific project requirements.

---

Note: The above content is a sample entry and does not represent an actual product. The word count may vary based on the actual content.