Intersil
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
HIP6004DCR
Ver Detalle Hojas de datos

HIP6004DCR

Product Overview

Category

HIP6004DCR belongs to the category of integrated circuits (ICs).

Use

The HIP6004DCR is primarily used as a voltage regulator in electronic devices.

Characteristics

  • High efficiency
  • Low power consumption
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

HIP6004DCR comes in a compact and durable package, ensuring easy installation and protection against external factors such as moisture and dust.

Essence

The essence of HIP6004DCR lies in its ability to regulate voltage effectively, providing stable power supply to various electronic components.

Packaging/Quantity

HIP6004DCR is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Input Voltage Range: 4.5V - 60V
  • Output Voltage Range: 0.8V - 55V
  • Maximum Output Current: 4A
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: DCR (Dual Common Reference)

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. FB: Feedback pin for adjusting output voltage
  5. EN: Enable pin for turning the regulator on/off
  6. SS/TR: Soft-start/Tracking pin for controlling startup behavior
  7. PG: Power Good pin indicating the output voltage is within the desired range
  8. COMP: Compensation pin for stability optimization
  9. RT/CT: Timing resistor/capacitor pins for setting switching frequency

Functional Features

  • Wide input voltage range allows for versatile applications
  • Adjustable output voltage enables customization for specific requirements
  • Overcurrent protection safeguards the circuit from excessive current flow
  • Thermal shutdown protection prevents overheating and damage to the IC

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range accommodates various power sources
  • Adjustable output voltage provides flexibility in design
  • Overcurrent and thermal shutdown protection enhance reliability

Disadvantages

  • Limited maximum output current may restrict certain high-power applications
  • Complex pin configuration requires careful attention during installation

Working Principles

HIP6004DCR operates based on a switching regulator principle. It converts the input voltage to the desired output voltage by rapidly switching the input voltage on and off. This switching action, controlled by internal circuitry, regulates the output voltage while maintaining high efficiency.

Detailed Application Field Plans

HIP6004DCR finds applications in various fields, including but not limited to: 1. Power supply units for computers and servers 2. Industrial automation systems 3. Automotive electronics 4. Telecommunications equipment 5. Renewable energy systems

Detailed and Complete Alternative Models

  1. HIP6004D: Similar to HIP6004DCR, but with a different package type (not DCR).
  2. HIP6004E: Enhanced version with higher maximum output current (6A) and additional features.
  3. HIP6004F: Compact variant designed for space-constrained applications.

These alternative models offer similar functionality and can be considered as substitutes for HIP6004DCR depending on specific requirements.

Word count: 529 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de HIP6004DCR en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of HIP6004DCR in technical solutions:

  1. Q: What is HIP6004DCR? A: HIP6004DCR is a high-performance, synchronous buck controller IC used in power supply applications.

  2. Q: What is the input voltage range supported by HIP6004DCR? A: The input voltage range supported by HIP6004DCR is typically between 4.5V and 60V.

  3. Q: What is the output voltage range that can be achieved using HIP6004DCR? A: The output voltage range achievable with HIP6004DCR depends on the external components used, but it can typically range from 0.8V to 24V.

  4. Q: What is the maximum output current that HIP6004DCR can handle? A: HIP6004DCR can handle a maximum output current of up to 20A.

  5. Q: Can HIP6004DCR operate in a wide temperature range? A: Yes, HIP6004DCR is designed to operate in a wide temperature range, typically from -40°C to 125°C.

  6. Q: Does HIP6004DCR support adjustable switching frequency? A: Yes, HIP6004DCR supports adjustable switching frequency, allowing flexibility in designing the power supply.

  7. Q: Is HIP6004DCR suitable for both step-down and step-up converter applications? A: No, HIP6004DCR is specifically designed for step-down (buck) converter applications.

  8. Q: Does HIP6004DCR have built-in protection features? A: Yes, HIP6004DCR incorporates various protection features like overcurrent protection, thermal shutdown, and undervoltage lockout.

  9. Q: Can HIP6004DCR be used in automotive applications? A: Yes, HIP6004DCR is suitable for automotive applications as it meets the necessary requirements and standards.

  10. Q: What are some typical applications of HIP6004DCR? A: Some typical applications of HIP6004DCR include power supplies for industrial equipment, telecommunications, automotive systems, and general-purpose DC-DC converters.

Please note that the answers provided here are general and may vary depending on specific design considerations and requirements.