Intersil
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
ISL8840AAUZ-T
Ver Detalle Hojas de datos

ISL8840AAUZ-T

Product Overview

Category

ISL8840AAUZ-T belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in power management applications.

Characteristics

  • High efficiency
  • Low quiescent current
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

ISL8840AAUZ-T is available in a small outline package (SOP) with 8 pins.

Essence

The essence of ISL8840AAUZ-T lies in its ability to efficiently regulate and control power in various electronic devices.

Packaging/Quantity

ISL8840AAUZ-T is typically packaged in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.6V to VIN
  • Maximum Output Current: 3A
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

ISL8840AAUZ-T has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for output voltage regulation
  4. COMP: Compensation pin for stability control
  5. EN: Enable pin for turning the device on/off
  6. SS: Soft-start pin for gradual power-up
  7. PGND: Power ground pin
  8. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: ISL8840AAUZ-T provides precise output voltage regulation, ensuring stable power supply to connected devices.
  • Overcurrent protection: The IC incorporates overcurrent protection, safeguarding against excessive current flow.
  • Thermal shutdown protection: In case of overheating, the device automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Wide input voltage range allows compatibility with various power sources.
  • Adjustable output voltage provides flexibility in different applications.
  • Overcurrent and thermal shutdown protection enhance device safety.

Disadvantages

  • Limited maximum output current may restrict usage in high-power applications.
  • The small package size may require careful handling during assembly.

Working Principles

ISL8840AAUZ-T operates based on a switching regulator principle. It utilizes pulse-width modulation (PWM) to regulate the output voltage. By adjusting the duty cycle of the PWM signal, the IC controls the amount of power delivered to the load, ensuring stable voltage regulation.

Detailed Application Field Plans

ISL8840AAUZ-T finds application in various fields, including: 1. Power supplies for consumer electronics 2. Industrial automation systems 3. Automotive electronics 4. LED lighting systems 5. Battery charging circuits

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ISL8840AAUZ-T are: 1. LM2596S-ADJ 2. LT1073-12 3. TPS5430DDAR 4. MAX5033DASA 5. MC34063AP1G

These models can be considered as alternatives depending on specific requirements and design constraints.

Word count: 358 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de ISL8840AAUZ-T en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of ISL8840AAUZ-T in technical solutions:

  1. Q: What is ISL8840AAUZ-T? A: ISL8840AAUZ-T is a high-performance synchronous buck controller IC used for voltage regulation in various technical applications.

  2. Q: What is the input voltage range supported by ISL8840AAUZ-T? A: The input voltage range supported by ISL8840AAUZ-T is typically between 4.5V and 28V.

  3. Q: What is the output voltage range that can be achieved using ISL8840AAUZ-T? A: The output voltage range that can be achieved using ISL8840AAUZ-T is typically between 0.6V and 5.5V.

  4. Q: What is the maximum output current that ISL8840AAUZ-T can handle? A: ISL8840AAUZ-T can handle a maximum output current of up to 20A.

  5. Q: Does ISL8840AAUZ-T support adjustable switching frequency? A: Yes, ISL8840AAUZ-T supports adjustable switching frequency ranging from 100kHz to 1MHz.

  6. Q: Can ISL8840AAUZ-T operate in a wide temperature range? A: Yes, ISL8840AAUZ-T is designed to operate in a wide temperature range, typically from -40°C to +125°C.

  7. Q: What protection features does ISL8840AAUZ-T offer? A: ISL8840AAUZ-T offers various protection features including overcurrent protection, overvoltage protection, undervoltage lockout, and thermal shutdown.

  8. Q: Can ISL8840AAUZ-T be used in battery-powered applications? A: Yes, ISL8840AAUZ-T can be used in battery-powered applications as it supports a wide input voltage range and offers efficient power conversion.

  9. Q: Is ISL8840AAUZ-T suitable for automotive applications? A: Yes, ISL8840AAUZ-T is suitable for automotive applications as it meets the necessary automotive standards and has a wide operating temperature range.

  10. Q: What are some typical applications of ISL8840AAUZ-T? A: Some typical applications of ISL8840AAUZ-T include power supplies, industrial automation, telecommunications equipment, and automotive electronics.

Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios. It is always recommended to refer to the datasheet and consult with technical experts for accurate information.