Intersil
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
ISL9000AIRKNZ
Ver Detalle Hojas de datos

ISL9000AIRKNZ

Product Overview

Category: Integrated Voltage Regulator
Use: Power management
Characteristics: High efficiency, low noise, compact size
Package: QFN-16
Essence: Voltage regulator with integrated power MOSFETs
Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.6V
  • Output Current: Up to 1A
  • Efficiency: Up to 95%
  • Quiescent Current: 25µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ISL9000AIRKNZ features a QFN-16 package with the following pin configuration:

  1. VIN: Input voltage
  2. EN: Enable pin
  3. PG: Power good indicator
  4. FB: Feedback voltage input
  5. GND: Ground
  6. SW: Switch node connection
  7. VOUT: Output voltage
  8. BST: Bootstrap capacitor connection
  9. AGND: Analog ground
  10. SS: Soft-start capacitor connection
  11. COMP: Compensation network connection
  12. NC: No connect
  13. NC: No connect
  14. NC: No connect
  15. NC: No connect
  16. VCC: Supply voltage for internal circuitry

Functional Features

  • Integrated power MOSFETs for high efficiency
  • Low dropout voltage for extended battery life
  • Adjustable output voltage through feedback resistor
  • Overcurrent and thermal protection
  • Power good indicator for system monitoring
  • Soft-start function for controlled startup

Advantages and Disadvantages

Advantages: - High efficiency results in reduced power consumption - Compact size saves board space - Wide input voltage range allows for versatile applications - Integrated protection features enhance system reliability

Disadvantages: - Limited output current may not be suitable for high-power applications - Fixed package type may limit flexibility in certain designs

Working Principles

The ISL9000AIRKNZ is an integrated voltage regulator designed to provide a stable and regulated output voltage from a varying input voltage source. It utilizes internal power MOSFETs to efficiently step down the input voltage to the desired output voltage level. The feedback mechanism adjusts the duty cycle of the internal switches to maintain the output voltage within the specified range. Additional features such as overcurrent and thermal protection ensure safe operation under various conditions.

Detailed Application Field Plans

The ISL9000AIRKNZ is widely used in portable electronic devices, IoT applications, and battery-powered systems where efficient power management is crucial. Some specific application areas include:

  1. Smartphones and tablets
  2. Wearable devices
  3. Wireless sensors
  4. Portable medical devices
  5. Industrial automation equipment
  6. Battery-powered IoT nodes

Detailed and Complete Alternative Models

  1. ISL9000AIRKZ: Similar specifications and features, but without power good indicator.
  2. ISL9000AIRJZ: Lower output current capability (up to 500mA), suitable for low-power applications.
  3. ISL9000AIRHZ: Higher output current capability (up to 2A), ideal for high-power applications.

(Note: This list is not exhaustive and other alternative models may exist.)

Word count: 346 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de ISL9000AIRKNZ en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of ISL9000AIRKNZ in technical solutions:

  1. Q: What is ISL9000AIRKNZ?
    A: ISL9000AIRKNZ is a high-performance voltage regulator designed for use in technical solutions.

  2. Q: What are the key features of ISL9000AIRKNZ?
    A: The key features of ISL9000AIRKNZ include low dropout voltage, wide input voltage range, and high output current capability.

  3. Q: What is the typical application of ISL9000AIRKNZ?
    A: ISL9000AIRKNZ is commonly used in battery-powered devices, portable electronics, and other applications where efficient power management is crucial.

  4. Q: What is the input voltage range of ISL9000AIRKNZ?
    A: The input voltage range of ISL9000AIRKNZ is typically between 2.5V and 5.5V.

  5. Q: What is the output voltage range of ISL9000AIRKNZ?
    A: The output voltage range of ISL9000AIRKNZ can be adjusted from 0.8V to 3.6V.

  6. Q: Can ISL9000AIRKNZ handle high output currents?
    A: Yes, ISL9000AIRKNZ has a high output current capability of up to 300mA.

  7. Q: Does ISL9000AIRKNZ have any protection features?
    A: Yes, ISL9000AIRKNZ includes built-in protection features such as overcurrent protection, thermal shutdown, and reverse current protection.

  8. Q: Is ISL9000AIRKNZ suitable for automotive applications?
    A: Yes, ISL9000AIRKNZ is designed to meet the requirements of automotive applications and can operate in a wide temperature range.

  9. Q: Can ISL9000AIRKNZ be used in low-power IoT devices?
    A: Absolutely, ISL9000AIRKNZ is well-suited for low-power IoT devices due to its low dropout voltage and high efficiency.

  10. Q: Are there any evaluation boards or reference designs available for ISL9000AIRKNZ?
    A: Yes, Intersil provides evaluation boards and reference designs that can help developers quickly integrate ISL9000AIRKNZ into their technical solutions.

Please note that the specific details and answers may vary depending on the manufacturer's documentation and application requirements.