Intersil
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
ISL9008AIRUNZ-T
Ver Detalle Hojas de datos

ISL9008AIRUNZ-T

Product Overview

Category: Integrated Voltage Regulator
Use: Power management
Characteristics: High efficiency, low quiescent current, small package size
Package: 16-Lead Thin Shrink Small Outline Package (TSSOP)
Essence: Voltage regulator IC
Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 0.6V to 3.6V
  • Output Current: Up to 1.5A
  • Quiescent Current: 17µA (typical)
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ISL9008AIRUNZ-T has a total of 16 pins. The pin configuration is as follows:

  1. VIN: Input voltage
  2. EN: Enable pin
  3. PG: Power good indicator
  4. VOUT: Output voltage
  5. FB: Feedback pin
  6. GND: Ground
  7. SW: Switching node
  8. BST: Boost capacitor connection
  9. AGND: Analog ground
  10. SS: Soft-start capacitor connection
  11. COMP: Compensation pin
  12. NC: No connect
  13. NC: No connect
  14. NC: No connect
  15. NC: No connect
  16. VCC: Supply voltage

Functional Features

  • Integrated synchronous buck regulator
  • Adjustable output voltage
  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Power good indicator
  • Soft-start capability
  • Small external component count

Advantages and Disadvantages

Advantages: - High efficiency, reducing power consumption - Wide input voltage range for versatile applications - Small package size, saving board space - Low quiescent current, extending battery life - Overcurrent and thermal protection for enhanced reliability

Disadvantages: - Limited output current compared to higher-power regulators - Requires additional external components for operation

Working Principles

The ISL9008AIRUNZ-T is an integrated voltage regulator that converts the input voltage to a regulated output voltage. It utilizes a synchronous buck topology, which efficiently steps down the input voltage to the desired output voltage. The feedback mechanism ensures accurate regulation by adjusting the duty cycle of the internal switches.

During operation, the regulator continuously monitors the output voltage and adjusts the switching frequency accordingly. This control loop maintains a stable output voltage despite variations in the input voltage or load conditions. The device also incorporates various protection features, such as overcurrent and thermal shutdown, to safeguard against potential faults.

Detailed Application Field Plans

The ISL9008AIRUNZ-T is suitable for a wide range of applications that require efficient power management. Some potential application fields include:

  1. Portable electronic devices: Smartphones, tablets, portable media players
  2. Wearable devices: Fitness trackers, smartwatches
  3. IoT devices: Sensors, wireless modules
  4. Battery-powered systems: Portable medical devices, handheld instruments
  5. Industrial equipment: Data loggers, control systems

Detailed and Complete Alternative Models

  1. ISL9008A: Similar specifications and features, but with a different package (DFN)
  2. ISL9008: Lower output current capability, suitable for lower-power applications
  3. ISL9008B: Higher output current capability, suitable for higher-power applications
  4. ISL9008C: Enhanced efficiency and lower quiescent current for ultra-low power applications

These alternative models provide flexibility in choosing the most suitable voltage regulator based on specific requirements and constraints.

Word count: 510 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de ISL9008AIRUNZ-T en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of ISL9008AIRUNZ-T in technical solutions:

  1. Q: What is ISL9008AIRUNZ-T? A: ISL9008AIRUNZ-T is a high-performance, low-noise, low-dropout (LDO) voltage regulator designed for various applications in technical solutions.

  2. Q: What is the input voltage range of ISL9008AIRUNZ-T? A: The input voltage range of ISL9008AIRUNZ-T is typically from 1.7V to 5.5V.

  3. Q: What is the output voltage range of ISL9008AIRUNZ-T? A: The output voltage range of ISL9008AIRUNZ-T can be adjusted from 0.6V to 3.6V using external resistors.

  4. Q: What is the maximum output current of ISL9008AIRUNZ-T? A: The maximum output current of ISL9008AIRUNZ-T is 300mA.

  5. Q: Is ISL9008AIRUNZ-T suitable for battery-powered applications? A: Yes, ISL9008AIRUNZ-T is well-suited for battery-powered applications due to its low quiescent current and low dropout voltage.

  6. Q: Does ISL9008AIRUNZ-T have built-in protection features? A: Yes, ISL9008AIRUNZ-T includes various protection features such as thermal shutdown, current limit, and reverse current protection.

  7. Q: Can ISL9008AIRUNZ-T operate in a wide temperature range? A: Yes, ISL9008AIRUNZ-T is designed to operate in a wide temperature range, typically from -40°C to +125°C.

  8. Q: What is the typical dropout voltage of ISL9008AIRUNZ-T? A: The typical dropout voltage of ISL9008AIRUNZ-T is as low as 200mV at 300mA load current.

  9. Q: Can ISL9008AIRUNZ-T be used in noise-sensitive applications? A: Yes, ISL9008AIRUNZ-T is designed with low-noise performance, making it suitable for noise-sensitive applications such as audio systems.

  10. Q: Is ISL9008AIRUNZ-T available in a small package? A: Yes, ISL9008AIRUNZ-T is available in a compact 6-pin Thin SOT23 package, which makes it suitable for space-constrained designs.

Please note that these answers are general and may vary depending on specific application requirements.