Intersil
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
ISL9011AIRJNZ-T
Ver Detalle Hojas de datos

ISL9011AIRJNZ-T

Product Overview

Category

ISL9011AIRJNZ-T belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a voltage regulator in various electronic devices.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Low quiescent current
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and thermal protection

Package

ISL9011AIRJNZ-T is available in a small 10-pin DFN package.

Essence

The essence of ISL9011AIRJNZ-T lies in its ability to regulate voltage efficiently and reliably, ensuring stable power supply to electronic components.

Packaging/Quantity

ISL9011AIRJNZ-T is typically packaged in reels containing 3000 units.

Specifications

  • Input Voltage Range: 2.3V to 5.5V
  • Output Voltage Range: 0.8V to VIN
  • Dropout Voltage: 200mV at 150mA
  • Quiescent Current: 17µA
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

ISL9011AIRJNZ-T has the following pin configuration:

  1. EN (Enable)
  2. GND (Ground)
  3. FB (Feedback)
  4. VOUT (Output Voltage)
  5. VIN (Input Voltage)
  6. NC (No Connection)
  7. NC (No Connection)
  8. NC (No Connection)
  9. NC (No Connection)
  10. PG (Power Good)

Functional Features

  • Enable/disable control
  • Adjustable output voltage through feedback pin
  • Power good indicator
  • Overcurrent protection
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages

  • High efficiency ensures minimal power loss
  • Wide input voltage range allows for versatile applications
  • Low dropout voltage enables operation with low input voltages
  • Overcurrent and thermal protection safeguards the circuit and components

Disadvantages

  • Limited output voltage range (0.8V to VIN)
  • Requires external components for proper operation

Working Principles

ISL9011AIRJNZ-T operates as a linear voltage regulator. It takes an input voltage and regulates it to a desired output voltage using feedback control. The enable pin allows for easy on/off control, while the power good indicator provides a signal indicating stable output voltage.

Detailed Application Field Plans

ISL9011AIRJNZ-T finds application in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ISL9011AIRJNZ-T are: - LM1117 - LT1763 - TPS7A47

These models can be considered based on specific requirements and design constraints.

Word count: 305 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de ISL9011AIRJNZ-T en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of ISL9011AIRJNZ-T in technical solutions:

Q1: What is ISL9011AIRJNZ-T? A1: ISL9011AIRJNZ-T is a low dropout voltage regulator (LDO) designed for use in various technical solutions.

Q2: What is the input voltage range of ISL9011AIRJNZ-T? A2: The input voltage range of ISL9011AIRJNZ-T is typically between 2.5V and 5.5V.

Q3: What is the output voltage range of ISL9011AIRJNZ-T? A3: The output voltage range of ISL9011AIRJNZ-T can be adjusted from 0.8V to 3.6V using external resistors.

Q4: What is the maximum output current of ISL9011AIRJNZ-T? A4: The maximum output current of ISL9011AIRJNZ-T is 150mA.

Q5: What are the typical applications of ISL9011AIRJNZ-T? A5: ISL9011AIRJNZ-T is commonly used in battery-powered devices, portable electronics, and other low-power applications.

Q6: Does ISL9011AIRJNZ-T have built-in thermal shutdown protection? A6: Yes, ISL9011AIRJNZ-T features built-in thermal shutdown protection to prevent overheating.

Q7: Can ISL9011AIRJNZ-T operate in a wide temperature range? A7: Yes, ISL9011AIRJNZ-T is designed to operate in a temperature range of -40°C to +85°C.

Q8: Is ISL9011AIRJNZ-T available in a small package? A8: Yes, ISL9011AIRJNZ-T is available in a compact 6-pin Thin SOT23 package.

Q9: Does ISL9011AIRJNZ-T require any external components for operation? A9: Yes, ISL9011AIRJNZ-T requires a few external capacitors and resistors for stable operation.

Q10: Is ISL9011AIRJNZ-T RoHS compliant? A10: Yes, ISL9011AIRJNZ-T is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental standards.

Please note that these answers are general and may vary depending on the specific application and requirements.