Intersil
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
ISL9011IRKFZ
Ver Detalle Hojas de datos

ISL9011IRKFZ

Product Overview

Category

ISL9011IRKFZ belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a voltage regulator in various electronic devices.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and thermal protection

Package

ISL9011IRKFZ is available in a small package, such as a 16-pin QFN (Quad Flat No-Lead) package.

Essence

The essence of ISL9011IRKFZ lies in its ability to regulate voltage efficiently and reliably.

Packaging/Quantity

ISL9011IRKFZ is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.3V to 5.5V
  • Output Voltage Range: 0.8V to VIN
  • Dropout Voltage: 200mV at 150mA load current
  • Quiescent Current: 17µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. EN (Enable)
  2. FB (Feedback)
  3. GND (Ground)
  4. VOUT (Output Voltage)
  5. VOUT (Output Voltage)
  6. VOUT (Output Voltage)
  7. VOUT (Output Voltage)
  8. VOUT (Output Voltage)
  9. VOUT (Output Voltage)
  10. VOUT (Output Voltage)
  11. VOUT (Output Voltage)
  12. VOUT (Output Voltage)
  13. VOUT (Output Voltage)
  14. VOUT (Output Voltage)
  15. VIN (Input Voltage)
  16. VIN (Input Voltage)

Functional Features

  • Enable/disable control
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Low quiescent current

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range allows for versatile applications
  • Adjustable output voltage provides flexibility
  • Overcurrent and thermal protection enhance reliability

Disadvantages

  • Limited output current capacity
  • Requires external components for proper operation

Working Principles

ISL9011IRKFZ operates as a linear voltage regulator. It takes an input voltage within the specified range and regulates it to a desired output voltage. The enable pin controls the device's operation, while the feedback pin sets the output voltage level. The IC incorporates various protection mechanisms to ensure safe operation under different conditions.

Detailed Application Field Plans

ISL9011IRKFZ finds applications in a wide range of electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT (Internet of Things) devices - Battery-powered systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL9011IRKFZ are: - LM1117 - LT1763 - TPS7A47

These models offer similar functionality and characteristics, providing options for different design requirements.

Note: The content provided above is approximately 350 words. Additional information may be required to reach the desired word count of 1100 words.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de ISL9011IRKFZ en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of ISL9011IRKFZ in technical solutions:

Q1: What is ISL9011IRKFZ? A1: ISL9011IRKFZ is a highly integrated low dropout (LDO) voltage regulator designed for use in various technical solutions.

Q2: What is the input voltage range of ISL9011IRKFZ? A2: The input voltage range of ISL9011IRKFZ is typically from 2.5V to 5.5V.

Q3: What is the output voltage range of ISL9011IRKFZ? A3: The output voltage range of ISL9011IRKFZ can be adjusted from 0.8V to 3.6V using external resistors.

Q4: What is the maximum output current of ISL9011IRKFZ? A4: The maximum output current of ISL9011IRKFZ is typically 150mA.

Q5: What is the dropout voltage of ISL9011IRKFZ? A5: The dropout voltage of ISL9011IRKFZ is typically 200mV at 150mA load.

Q6: Does ISL9011IRKFZ have thermal shutdown protection? A6: Yes, ISL9011IRKFZ has built-in thermal shutdown protection to prevent overheating.

Q7: Can ISL9011IRKFZ operate in a wide temperature range? A7: Yes, ISL9011IRKFZ is designed to operate in a temperature range of -40°C to +85°C.

Q8: Is ISL9011IRKFZ suitable for battery-powered applications? A8: Yes, ISL9011IRKFZ is suitable for battery-powered applications due to its low quiescent current and low dropout voltage.

Q9: Does ISL9011IRKFZ have short-circuit protection? A9: Yes, ISL9011IRKFZ has built-in short-circuit protection to prevent damage in case of a short circuit.

Q10: What package options are available for ISL9011IRKFZ? A10: ISL9011IRKFZ is available in a 6-pin Thin SOT23 package, which is small and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.