IXYS
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
IXFP38N30X3M

IXFP38N30X3M

Product Overview

  • Category: Power MOSFET
  • Use: High power switching applications
  • Characteristics: High voltage, high current capability, low on-resistance
  • Package: TO-220
  • Essence: Efficient power management
  • Packaging/Quantity: Bulk packaging, quantity varies

Specifications

  • Voltage Rating: 300V
  • Current Rating: 38A
  • On-Resistance: 0.038 ohms
  • Gate Charge: 38nC
  • Operating Temperature: -55°C to 175°C

Detailed Pin Configuration

The IXFP38N30X3M features a standard TO-220 pin configuration with three pins: gate (G), drain (D), and source (S).

Functional Features

  • High voltage capability
  • Low on-resistance for reduced power dissipation
  • Fast switching speed
  • Low gate charge for improved efficiency

Advantages and Disadvantages

Advantages

  • High power handling capability
  • Low on-resistance for minimal power loss
  • Fast switching speed for improved performance

Disadvantages

  • Higher gate charge compared to some alternative models
  • Limited operating temperature range

Working Principles

The IXFP38N30X3M operates based on the principles of field-effect transistors, utilizing its high voltage and current capabilities to efficiently switch power in various applications.

Detailed Application Field Plans

This MOSFET is suitable for a wide range of high-power applications, including: - Switch mode power supplies - Motor control - Inverters - Industrial equipment

Detailed and Complete Alternative Models

  • IRFP460: Similar voltage and current ratings
  • FDP8878: Lower gate charge, suitable for high-frequency applications
  • STP36NF06L: Lower on-resistance, suitable for high-efficiency designs

Note: The above alternatives should be carefully evaluated based on specific application requirements.

This comprehensive entry provides an in-depth understanding of the IXFP38N30X3M Power MOSFET, covering its specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de IXFP38N30X3M en soluciones técnicas

  1. What is the maximum voltage rating of IXFP38N30X3M?

    • The maximum voltage rating of IXFP38N30X3M is 300V.

  2. What is the maximum continuous drain current of IXFP38N30X3M?

    • The maximum continuous drain current of IXFP38N30X3M is 38A.

  3. What type of package does IXFP38N30X3M come in?

    • IXFP38N30X3M comes in a TO-220 package.

  4. What are the typical applications for IXFP38N30X3M?

    • IXFP38N30X3M is commonly used in motor control, power supplies, and inverters.

  5. What is the on-state resistance of IXFP38N30X3M?

    • The on-state resistance of IXFP38N30X3M is typically 0.095 ohms.

  6. Is IXFP38N30X3M suitable for high-frequency switching applications?

    • Yes, IXFP38N30X3M is suitable for high-frequency switching due to its low on-state resistance.

  7. Does IXFP38N30X3M require a heat sink for proper operation?

    • Depending on the application and power dissipation, a heat sink may be required for IXFP38N30X3M.

  8. What is the gate-source threshold voltage of IXFP38N30X3M?

    • The gate-source threshold voltage of IXFP38N30X3M is typically 2.5V.

  9. Can IXFP38N30X3M be used in automotive applications?

    • Yes, IXFP38N30X3M can be used in automotive applications, provided it meets the specific requirements and standards.

  10. Are there any recommended driver circuits for IXFP38N30X3M?

    • It is recommended to use a gate driver circuit that can provide sufficient drive voltage and current for IXFP38N30X3M.