The LT1461AIS8-2.5#PBF belongs to the category of voltage references.
This product is primarily used as a precision voltage reference in various electronic circuits.
The LT1461AIS8-2.5#PBF comes in an 8-pin SOIC package.
The essence of this product lies in its ability to provide a stable and accurate voltage reference, which is crucial for the proper functioning of many electronic devices.
The LT1461AIS8-2.5#PBF is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.
The LT1461AIS8-2.5#PBF has the following pin configuration:
```
| | --| VOUT | --| GND | --| TRIM | --| NC | --| V+ | --| NC | --| VIN | |___________| ```
The LT1461AIS8-2.5#PBF utilizes a bandgap voltage reference circuit to generate a stable and accurate output voltage. This circuit takes advantage of the temperature-dependent properties of semiconductor materials to maintain a consistent voltage reference despite changes in temperature or supply voltage.
The LT1461AIS8-2.5#PBF finds application in various fields, including:
These alternative models can be considered based on specific application requirements and desired features.
In conclusion, the LT1461AIS8-2.5#PBF is a highly accurate and stable voltage reference suitable for various electronic applications. Its low noise output, wide operating range, and low power consumption make it an excellent choice for precision measurement instruments, power management systems, and communication equipment.
Sure! Here are 10 common questions and answers related to the application of LT1461AIS8-2.5#PBF in technical solutions:
Q1: What is the LT1461AIS8-2.5#PBF? A1: The LT1461AIS8-2.5#PBF is a precision voltage reference IC manufactured by Linear Technology (now part of Analog Devices). It provides a stable and accurate output voltage of 2.5V.
Q2: What is the typical application of LT1461AIS8-2.5#PBF? A2: The LT1461AIS8-2.5#PBF is commonly used as a voltage reference in various electronic circuits, such as analog-to-digital converters (ADCs), digital-to-analog converters (DACs), voltage regulators, and other precision measurement systems.
Q3: What is the voltage accuracy of LT1461AIS8-2.5#PBF? A3: The LT1461AIS8-2.5#PBF has a typical initial accuracy of ±0.05% and a maximum temperature coefficient of ±20ppm/°C.
Q4: What is the operating temperature range of LT1461AIS8-2.5#PBF? A4: The LT1461AIS8-2.5#PBF can operate within a temperature range of -40°C to +125°C.
Q5: How much current does LT1461AIS8-2.5#PBF consume? A5: The LT1461AIS8-2.5#PBF has a low quiescent current consumption of typically 80µA.
Q6: Can LT1461AIS8-2.5#PBF operate from a single power supply? A6: Yes, LT1461AIS8-2.5#PBF can operate from a single power supply ranging from 2.7V to 20V.
Q7: Does LT1461AIS8-2.5#PBF require any external components for operation? A7: No, LT1461AIS8-2.5#PBF is a complete voltage reference and does not require any external components for its basic operation.
Q8: Can LT1461AIS8-2.5#PBF be used in battery-powered applications? A8: Yes, LT1461AIS8-2.5#PBF's low quiescent current consumption makes it suitable for battery-powered applications where power efficiency is crucial.
Q9: What is the package type of LT1461AIS8-2.5#PBF? A9: LT1461AIS8-2.5#PBF is available in an 8-pin SOIC (Small Outline Integrated Circuit) package.
Q10: Is LT1461AIS8-2.5#PBF RoHS compliant? A10: Yes, LT1461AIS8-2.5#PBF is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.