La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
LT3061EMS8E#TRPBF

LT3061EMS8E#TRPBF

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - Low Dropout Voltage - High Output Current - Adjustable Output Voltage - Low Noise - Thermal Shutdown Protection

Package: MSOP-8

Essence: The LT3061EMS8E#TRPBF is a voltage regulator IC that provides a stable output voltage with low dropout voltage and high output current capability. It is commonly used in various electronic devices to regulate the voltage supplied to sensitive components.

Packaging/Quantity: The LT3061EMS8E#TRPBF is available in a MSOP-8 package. It is typically sold in reels or tubes containing multiple units.

Specifications

  • Input Voltage Range: 2.7V to 45V
  • Output Voltage Range: 0.6V to 40V
  • Dropout Voltage: 300mV at 1A Load
  • Output Current: Up to 1.5A
  • Line Regulation: ±0.02%
  • Load Regulation: ±0.1%
  • Quiescent Current: 30µA
  • Ripple Rejection: 70dB
  • Operating Temperature Range: -40°C to 125°C

Pin Configuration

The LT3061EMS8E#TRPBF has the following pin configuration:

```


| | --| VIN GND |-- Pin 1: Ground --| VOUT NC |-- Pin 2: No Connection --| ADJ NC |-- Pin 3: No Connection --| NC NC |-- Pin 4: No Connection --| NC NC |-- Pin 5: No Connection --| NC NC |-- Pin 6: No Connection --| NC NC |-- Pin 7: No Connection --| NC VOUT |-- Pin 8: Output Voltage |___________| ```

Functional Features

  • Low dropout voltage allows the regulator to operate with a small voltage difference between the input and output.
  • High output current capability enables it to power devices with high current requirements.
  • Adjustable output voltage allows for flexibility in various applications.
  • Low noise output ensures stable and clean power supply to sensitive components.
  • Thermal shutdown protection prevents the IC from overheating and damaging itself.

Advantages and Disadvantages

Advantages: - Wide input voltage range - High output current capability - Low dropout voltage - Adjustable output voltage - Low noise output - Thermal shutdown protection

Disadvantages: - Limited availability of alternative models - Relatively higher cost compared to some other voltage regulators

Working Principles

The LT3061EMS8E#TRPBF is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage, adjusting the pass transistor's resistance to maintain a stable output voltage. The device also incorporates various protection features, such as thermal shutdown, to ensure safe operation.

Detailed Application Field Plans

The LT3061EMS8E#TRPBF can be used in a wide range of applications, including but not limited to: - Power supplies for microcontrollers and other digital ICs - Battery-powered devices - Automotive electronics - Industrial control systems - Audio amplifiers - LED lighting systems

Detailed and Complete Alternative Models

While the LT3061EMS8E#TRPBF is a versatile voltage regulator, there are alternative models available from different manufacturers that offer similar functionality. Some popular alternatives include: - Texas Instruments LM317 - Analog Devices ADP3339 - ON Semiconductor NCP1117

These alternative models may have slightly different specifications and pin configurations, so it is important to refer to their respective datasheets for detailed information.

Word count: 345 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de LT3061EMS8E#TRPBF en soluciones técnicas

  1. Question: What is the input voltage range for LT3061EMS8E#TRPBF?
    Answer: The input voltage range for LT3061EMS8E#TRPBF is 1.6V to 45V.

  2. Question: What is the typical output voltage accuracy of LT3061EMS8E#TRPBF?
    Answer: The typical output voltage accuracy of LT3061EMS8E#TRPBF is ±2%.

  3. Question: Can LT3061EMS8E#TRPBF be used in battery-powered applications?
    Answer: Yes, LT3061EMS8E#TRPBF is suitable for battery-powered applications due to its low dropout voltage and low quiescent current.

  4. Question: What is the maximum output current of LT3061EMS8E#TRPBF?
    Answer: The maximum output current of LT3061EMS8E#TRPBF is 200mA.

  5. Question: Is LT3061EMS8E#TRPBF suitable for automotive applications?
    Answer: Yes, LT3061EMS8E#TRPBF is designed to operate in automotive environments and is AEC-Q100 qualified.

  6. Question: What is the typical dropout voltage of LT3061EMS8E#TRPBF?
    Answer: The typical dropout voltage of LT3061EMS8E#TRPBF is 300mV at 100mA load.

  7. Question: Can LT3061EMS8E#TRPBF be used in industrial control systems?
    Answer: Yes, LT3061EMS8E#TRPBF is suitable for use in industrial control systems due to its wide input voltage range and high reliability.

  8. Question: Does LT3061EMS8E#TRPBF have built-in thermal shutdown protection?
    Answer: Yes, LT3061EMS8E#TRPBF features thermal shutdown protection to prevent overheating.

  9. Question: What is the operating temperature range of LT3061EMS8E#TRPBF?
    Answer: LT3061EMS8E#TRPBF can operate within a temperature range of -40°C to 125°C.

  10. Question: Is LT3061EMS8E#TRPBF available in a small package for space-constrained applications?
    Answer: Yes, LT3061EMS8E#TRPBF is available in an 8-lead MSOP package, making it suitable for space-constrained applications.