Linear Technology/QD Devices
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
LT8610AIMSE-5#PBF
Ver Detalle Hojas de datos

LT8610AIMSE-5#PBF

Product Overview

Category

The LT8610AIMSE-5#PBF belongs to the category of integrated circuits (ICs) and specifically falls under the power management ICs.

Use

This product is primarily used for voltage regulation and power management in various electronic devices and systems.

Characteristics

  • High efficiency: The LT8610AIMSE-5#PBF offers high efficiency power conversion, minimizing energy loss.
  • Wide input voltage range: It can handle a wide range of input voltages, making it suitable for diverse applications.
  • Low quiescent current: The IC has low quiescent current consumption, reducing power wastage during standby or idle modes.
  • Adjustable output voltage: The output voltage can be easily adjusted according to the specific requirements of the application.
  • Compact package: The LT8610AIMSE-5#PBF comes in a small and compact package, enabling space-saving designs.

Package and Quantity

The LT8610AIMSE-5#PBF is available in a surface-mount package known as MSOP-16. It is typically sold in reels containing a specified quantity of units, such as 2500 pieces per reel.

Specifications

  • Input Voltage Range: 3V to 42V
  • Output Voltage Range: 0.8V to 40V
  • Maximum Continuous Output Current: 2.5A
  • Switching Frequency: Up to 2MHz
  • Quiescent Current: 2.5µA
  • Operating Temperature Range: -40°C to 125°C

Pin Configuration

The LT8610AIMSE-5#PBF features a total of 16 pins arranged as follows:

  1. VIN: Input voltage pin
  2. SW: Switching node connection
  3. GND: Ground reference
  4. FB: Feedback pin for output voltage regulation
  5. SS/TR/UVLO: Soft-start, tracking, and undervoltage lockout control pin
  6. VCC: Supply voltage for internal circuitry
  7. SYNC: Synchronization input for external clock
  8. RT: Timing resistor connection for setting switching frequency
  9. COMP: Compensation pin for stability control
  10. PGND: Power ground reference
  11. BST: Bootstrap capacitor connection
  12. LX: Inductor connection
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. NC: No connection

Functional Features

  • Wide input voltage range allows compatibility with various power sources.
  • High efficiency conversion minimizes energy loss and heat generation.
  • Adjustable output voltage enables customization for specific applications.
  • Integrated protection features such as overcurrent and overtemperature safeguards.
  • Soft-start and tracking functionality for controlled startup and shutdown sequences.
  • Synchronization capability for precise timing in multi-phase configurations.

Advantages and Disadvantages

Advantages

  • High efficiency power conversion
  • Wide input voltage range
  • Compact package size
  • Adjustable output voltage
  • Integrated protection features

Disadvantages

  • Limited maximum continuous output current (2.5A)
  • Requires additional external components for operation

Working Principles

The LT8610AIMSE-5#PBF operates based on a buck converter topology. It utilizes high-frequency switching to regulate the input voltage down to the desired output voltage level. The integrated control circuitry ensures efficient power transfer by adjusting the duty cycle of the switching transistor. This results in minimal energy loss and effective voltage regulation.

Detailed Application Field Plans

The LT8610AIMSE-5#PBF finds application in various fields, including but not limited to: - Industrial automation systems - Automotive electronics - Telecommunications equipment - Portable electronic devices - Power supply modules

Alternative Models

For those seeking alternative options, the following models provide similar functionality to the LT8610AIMSE-5#PBF: - LT8610AEMSE-5#PBF - LT8610BIMSE-5#PBF - LT8610CIMSE-5#PBF - LT8610DIMSE-5#PBF

These alternatives offer comparable specifications and features, providing flexibility in design choices.

In conclusion, the LT8610AIMSE-5#PBF is a highly efficient power management IC that offers adjustable output voltage and a wide input voltage range. Its compact package and integrated protection features make it suitable for various applications. However, it has a limited maximum continuous output current and requires additional external components for operation. With its working principles based on buck converter topology, it finds application in diverse fields such as industrial automation, automotive electronics, and telecommunications. Alternative models like LT8610AEMSE-5#PBF, LT8610BIMSE-5#PBF, LT8610CIMSE-5#

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de LT8610AIMSE-5#PBF en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of LT8610AIMSE-5#PBF in technical solutions:

  1. Q: What is the LT8610AIMSE-5#PBF? A: The LT8610AIMSE-5#PBF is a specific model of the LT8610A synchronous step-down DC/DC converter manufactured by Analog Devices.

  2. Q: What is the input voltage range of the LT8610AIMSE-5#PBF? A: The LT8610AIMSE-5#PBF has an input voltage range of 3.4V to 42V.

  3. Q: What is the output voltage range of the LT8610AIMSE-5#PBF? A: The LT8610AIMSE-5#PBF can provide an adjustable output voltage range from 0.8V to VIN.

  4. Q: What is the maximum output current of the LT8610AIMSE-5#PBF? A: The LT8610AIMSE-5#PBF can deliver a maximum output current of 5A.

  5. Q: What is the efficiency of the LT8610AIMSE-5#PBF? A: The LT8610AIMSE-5#PBF has a high efficiency, typically up to 96%.

  6. Q: Does the LT8610AIMSE-5#PBF have built-in protection features? A: Yes, the LT8610AIMSE-5#PBF includes various protection features such as overvoltage protection, overcurrent protection, and thermal shutdown.

  7. Q: Can the LT8610AIMSE-5#PBF be used in automotive applications? A: Yes, the LT8610AIMSE-5#PBF is suitable for automotive applications as it can operate in a wide input voltage range and has automotive-grade reliability.

  8. Q: What is the switching frequency of the LT8610AIMSE-5#PBF? A: The LT8610AIMSE-5#PBF operates at a fixed switching frequency of 2.2MHz.

  9. Q: Can the LT8610AIMSE-5#PBF be synchronized to an external clock? A: Yes, the LT8610AIMSE-5#PBF supports synchronization to an external clock signal.

  10. Q: What are some typical applications of the LT8610AIMSE-5#PBF? A: The LT8610AIMSE-5#PBF can be used in various applications such as industrial equipment, automotive systems, telecom infrastructure, and power supplies for portable devices.

Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios.