LTC2755AIUP-16#TRPBF

Product Overview

Category

The LTC2755AIUP-16#TRPBF belongs to the category of digital-to-analog converters (DACs).

Use

This product is primarily used in applications where a high-resolution analog output signal is required. It converts digital data into an analog voltage or current, making it suitable for various industrial and consumer electronic devices.

Characteristics

• High resolution: The LTC2755AIUP-16#TRPBF offers a resolution of 16 bits, ensuring precise and accurate analog output.
• Low noise: It provides a low noise performance, resulting in clean and reliable analog signals.
• Fast settling time: The DAC has a fast settling time, enabling rapid response to changes in the input digital data.
• Wide operating temperature range: It can operate within a wide temperature range, making it suitable for harsh environments.
• Low power consumption: The LTC2755AIUP-16#TRPBF consumes minimal power, contributing to energy-efficient designs.

Package

This product is available in a small form factor package, such as the 16-lead QFN (Quad Flat No-Lead) package. This package ensures easy integration into compact electronic systems.

Essence

The essence of the LTC2755AIUP-16#TRPBF lies in its ability to convert digital data into high-resolution analog signals with low noise and fast settling time. Its compact package and low power consumption make it ideal for various applications.

Packaging/Quantity

The LTC2755AIUP-16#TRPBF is typically packaged in reels or trays, depending on the manufacturer's specifications. The quantity per reel or tray may vary, but it is commonly available in quantities suitable for both prototyping and mass production.

Specifications

• Resolution: 16 bits
• Output Type: Voltage or Current
• Supply Voltage: 2.7V to 5.5V
• Operating Temperature Range: -40°C to 125°C
• Integral Nonlinearity (INL): ±1 LSB (Max)
• Differential Nonlinearity (DNL): ±0.5 LSB (Max)
• Settling Time: 4µs (Typ)
• Power Consumption: 3.5mW (Typ)

Detailed Pin Configuration

The LTC2755AIUP-16#TRPBF has a total of 16 pins, each serving a specific function. The pin configuration is as follows:

1. VDD: Power supply voltage input
2. GND: Ground reference
3. REF: Reference voltage input
4. AGND: Analog ground reference
5. OUT: Analog output voltage or current
6. DIN0: Digital input bit 0
7. DIN1: Digital input bit 1
8. DIN2: Digital input bit 2
9. DIN3: Digital input bit 3
10. DIN4: Digital input bit 4
11. DIN5: Digital input bit 5
12. DIN6: Digital input bit 6
13. DIN7: Digital input bit 7
14. DIN8: Digital input bit 8
15. DIN9: Digital input bit 9
16. CS: Chip select input

Functional Features

• High-resolution digital-to-analog conversion
• Low noise performance for clean analog signals
• Fast settling time for rapid response
• Wide operating temperature range for versatility
• Low power consumption for energy efficiency

Advantages and Disadvantages

Advantages

• High resolution ensures accurate analog output.
• Low noise performance results in clean and reliable signals.
• Fast settling time enables quick response to input changes.
• Wide operating temperature range allows for use in various environments.
• Low power consumption contributes to energy-efficient designs.

Disadvantages

• May require additional external components for specific applications.
• Limited output voltage or current range compared to some other DACs.
• Higher cost compared to lower-resolution DACs.

Working Principles

The LTC2755AIUP-16#TRPBF operates based on the principle of digital-to-analog conversion. It receives digital input data and converts it into an analog voltage or current output. This conversion is achieved through a combination of internal circuitry, including digital-to-analog converters, reference voltage sources, and amplifiers. The digital input data is processed and transformed into a corresponding analog signal, which can be used as an output in various electronic systems.

Detailed Application Field Plans

The LTC2755AIUP-16#TRPBF finds application in a wide range of fields, including but not limited to:

1. Industrial Automation: Used in process control systems, motor control, and instrumentation.
2. Audio Equipment: Provides high-resolution audio signals in professional audio equipment and consumer audio devices.
3. Test and Measurement: Enables precise signal generation and calibration in