Linear Technology/QD Devices
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
LTC2960CTS8-1#TRPBF
Ver Detalle Hojas de datos

LTC2960CTS8-1#TRPBF

Product Overview

Category

The LTC2960CTS8-1#TRPBF belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage monitoring and power supply sequencing applications.

Characteristics

  • Voltage monitoring: The LTC2960CTS8-1#TRPBF is designed to monitor multiple voltage rails in a system, ensuring stable and reliable operation.
  • Power supply sequencing: It enables proper power-up and power-down sequencing of various components in a circuit, preventing potential damage or malfunction.
  • Package: The LTC2960CTS8-1#TRPBF comes in an 8-pin small outline package (SOIC).
  • Essence: This IC provides accurate voltage monitoring and sequencing capabilities, enhancing the overall performance and reliability of electronic systems.
  • Packaging/Quantity: The LTC2960CTS8-1#TRPBF is typically packaged in reels, with a quantity of 2500 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 80V
  • Voltage Threshold Accuracy: ±1.5%
  • Quiescent Current: 10μA
  • Operating Temperature Range: -40°C to 85°C
  • Output Type: Open-drain
  • Fault Detection Timeout: Adjustable from 1ms to 10s

Detailed Pin Configuration

The LTC2960CTS8-1#TRPBF has the following pin configuration:

  1. GND: Ground connection
  2. VIN: Input voltage supply
  3. VCC: Internal voltage reference output
  4. FLT: Fault output indicating voltage threshold violation
  5. OV: Overvoltage input pin
  6. UV: Undervoltage input pin
  7. ADJ: Adjust pin for setting the fault detection timeout
  8. NC: No connection

Functional Features

  • Voltage Monitoring: The LTC2960CTS8-1#TRPBF continuously monitors the input voltage and compares it to user-defined thresholds, generating a fault signal if the voltage exceeds or falls below the set limits.
  • Power Supply Sequencing: It provides a controlled power-up and power-down sequence for multiple voltage rails, ensuring proper operation of sensitive components.
  • Adjustable Fault Detection Timeout: The IC allows users to adjust the time delay for fault detection, providing flexibility in system design.

Advantages and Disadvantages

Advantages

  • Accurate voltage monitoring and sequencing capabilities
  • Wide input voltage range
  • Low quiescent current consumption
  • Adjustable fault detection timeout
  • Compact package size

Disadvantages

  • Limited number of pins for additional functionalities
  • Requires external components for complete circuit implementation

Working Principles

The LTC2960CTS8-1#TRPBF operates by comparing the input voltage with user-defined thresholds. If the voltage exceeds or falls below the set limits, the IC generates a fault signal through the FLT pin. This enables the system to take appropriate actions, such as shutting down or activating protective measures.

Detailed Application Field Plans

The LTC2960CTS8-1#TRPBF finds applications in various fields, including:

  1. Power supply units: It ensures stable and reliable voltage monitoring and sequencing in power supply units, preventing damage to sensitive components during power-up and power-down sequences.
  2. Industrial automation: The IC is used in industrial automation systems to monitor and control voltage levels, ensuring safe and efficient operation.
  3. Automotive electronics: It plays a crucial role in automotive electronic systems, providing accurate voltage monitoring and sequencing for critical components like engine control units (ECUs) and safety systems.
  4. Telecommunications: The LTC2960CTS8-1#TRPBF is utilized in telecommunications equipment to monitor and control voltage levels, ensuring uninterrupted operation and preventing damage to sensitive circuitry.

Detailed and Complete Alternative Models

  1. LTC2960ITS8-1#TRPBF: Similar to LTC2960CTS8-1#TRPBF but comes in a different package (SOT-23).
  2. LTC2960HMS8-1#TRPBF: Higher voltage range (up to 100V) with similar features and pin configuration.
  3. LTC2960CDD-1#PBF: Dual-channel version of the LTC2960 series, suitable for applications requiring monitoring of multiple voltage rails.

These alternative models provide similar functionality and can be used as substitutes based on specific requirements.

Word count: 570 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de LTC2960CTS8-1#TRPBF en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of LTC2960CTS8-1#TRPBF in technical solutions:

Q1: What is LTC2960CTS8-1#TRPBF? A1: LTC2960CTS8-1#TRPBF is a specific model number for a power monitor and supervisor integrated circuit (IC) manufactured by Linear Technology (now part of Analog Devices). It is used to monitor various power supply parameters in electronic systems.

Q2: What are the key features of LTC2960CTS8-1#TRPBF? A2: Some key features of LTC2960CTS8-1#TRPBF include undervoltage and overvoltage monitoring, adjustable threshold levels, power supply sequencing, fault detection, and an I2C interface for communication with a microcontroller.

Q3: How can LTC2960CTS8-1#TRPBF be used in a technical solution? A3: LTC2960CTS8-1#TRPBF can be used to monitor and control power supply voltages in various applications such as industrial automation, telecommunications, automotive systems, and embedded systems.

Q4: What is the operating voltage range of LTC2960CTS8-1#TRPBF? A4: The operating voltage range of LTC2960CTS8-1#TRPBF is typically between 2.7V and 80V.

Q5: Can LTC2960CTS8-1#TRPBF be used for both AC and DC power supplies? A5: Yes, LTC2960CTS8-1#TRPBF can be used for both AC and DC power supplies as long as they fall within the specified operating voltage range.

Q6: How accurate is the voltage measurement capability of LTC2960CTS8-1#TRPBF? A6: The voltage measurement accuracy of LTC2960CTS8-1#TRPBF is typically within ±1.5% of the measured voltage.

Q7: Can LTC2960CTS8-1#TRPBF detect power supply faults such as overcurrent or short circuits? A7: Yes, LTC2960CTS8-1#TRPBF has built-in fault detection capabilities and can detect overcurrent conditions or short circuits in the power supply.

Q8: Is LTC2960CTS8-1#TRPBF capable of generating an interrupt signal upon detecting a fault condition? A8: Yes, LTC2960CTS8-1#TRPBF can generate an interrupt signal to alert the microcontroller or system when a fault condition is detected.

Q9: Can LTC2960CTS8-1#TRPBF be programmed for specific threshold levels? A9: Yes, LTC2960CTS8-1#TRPBF allows users to program the threshold levels for undervoltage and overvoltage monitoring according to their specific requirements.

Q10: Does LTC2960CTS8-1#TRPBF support communication with a microcontroller? A10: Yes, LTC2960CTS8-1#TRPBF features an I2C interface that enables communication with a microcontroller for configuration and data retrieval purposes.

Please note that the answers provided here are general and may vary depending on the specific application and implementation of LTC2960CTS8-1#TRPBF in a technical solution. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information and guidance.