La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
LTC3676HUJ#PBF

LTC3676HUJ#PBF

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - High efficiency - Low quiescent current - Wide input voltage range - Multiple output channels - Flexible power sequencing - Programmable power-up and power-down sequences

Package: 40-Lead QFN (Quad Flat No-Lead) package

Essence: The LTC3676HUJ#PBF is a highly integrated power management IC designed for portable electronic devices. It provides multiple regulated voltages to power various components of the device.

Packaging/Quantity: The LTC3676HUJ#PBF is available in a 40-Lead QFN package. The quantity per reel is typically 2500 units.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: Programmable from 0.8V to 3.3V
  • Number of Outputs: 6
  • Maximum Output Current: Up to 1A per channel
  • Quiescent Current: 35µA (typical)
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The LTC3676HUJ#PBF has a total of 40 pins. Here is a brief description of some important pins:

  • VIN: Input voltage pin
  • VOUT1 to VOUT6: Output voltage pins
  • EN1 to EN6: Enable pins for each output channel
  • PGOOD1 to PGOOD6: Power good pins indicating the status of each output channel
  • GND: Ground pin

For a complete pin configuration diagram, please refer to the datasheet.

Functional Features

  1. Multiple Output Channels: The LTC3676HUJ#PBF provides six independent output channels, allowing it to power different components of the device simultaneously.

  2. Flexible Power Sequencing: The IC supports flexible power sequencing, enabling controlled power-up and power-down sequences for various components.

  3. Programmable Voltage Output: The output voltage of each channel can be programmed within a range of 0.8V to 3.3V, providing flexibility in powering different components.

  4. Low Quiescent Current: The IC has a low quiescent current of only 35µA, minimizing power consumption when the device is in standby or idle mode.

Advantages and Disadvantages

Advantages: - High efficiency power management - Wide input voltage range - Multiple output channels for simultaneous powering of different components - Flexible power sequencing for controlled operation - Low quiescent current for reduced power consumption

Disadvantages: - Limited maximum output current per channel (up to 1A)

Working Principles

The LTC3676HUJ#PBF integrates various power management functions into a single IC. It utilizes switching regulators, LDOs (low-dropout regulators), and other circuitry to efficiently convert the input voltage to multiple regulated output voltages required by the device's components.

The IC incorporates control logic to enable flexible power sequencing and programmable voltage outputs. It also includes protection features such as overvoltage protection, undervoltage lockout, and thermal shutdown to ensure safe operation.

Detailed Application Field Plans

The LTC3676HUJ#PBF is widely used in portable electronic devices that require efficient power management. Some common application fields include:

  1. Smartphones and Tablets: The IC powers various components such as processors, memory, display panels, and wireless modules in smartphones and tablets.

  2. Portable Gaming Devices: It provides regulated voltages to power gaming consoles, screens, audio systems, and other components in portable gaming devices.

  3. Wearable Devices: The IC is suitable for powering wearable devices like smartwatches, fitness trackers, and augmented reality glasses.

  4. Portable Medical Devices: It can be used in portable medical devices such as patient monitors, infusion pumps, and handheld diagnostic tools.

Detailed and Complete Alternative Models

  1. LTC3676EUJ#PBF: Similar to LTC3676HUJ#PBF but available in a different package (32-Lead QFN).
  2. LTC3676IUJ#PBF: Similar to LTC3676HUJ#PBF but with extended temperature range (-40°C to 125°C).
  3. LTC3676CUJ#PBF: Similar to LTC3676HUJ#PBF but with a lower quiescent current (25µA typical).

These alternative models offer similar functionality and can be considered based on specific requirements and preferences.

*Note: The content provided above is a sample structure for an encyclopedia entry and may not reflect the actual specifications or details of the LTC3676HUJ#PBF.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de LTC3676HUJ#PBF en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of LTC3676HUJ#PBF in technical solutions:

  1. Q: What is LTC3676HUJ#PBF? A: LTC3676HUJ#PBF is a high-efficiency power management IC (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of LTC3676HUJ#PBF? A: Some key features include multiple voltage regulators, power sequencing, power-on reset, watchdog timer, and I2C interface.

  3. Q: What technical solutions can LTC3676HUJ#PBF be used in? A: LTC3676HUJ#PBF can be used in a wide range of applications such as portable devices, industrial equipment, automotive systems, and more.

  4. Q: How many voltage regulators does LTC3676HUJ#PBF have? A: LTC3676HUJ#PBF has six voltage regulators, which can provide different output voltages as per the requirements of the system.

  5. Q: Can LTC3676HUJ#PBF handle power sequencing? A: Yes, LTC3676HUJ#PBF supports power sequencing, allowing for controlled startup and shutdown of various power rails.

  6. Q: Does LTC3676HUJ#PBF have any built-in protection features? A: Yes, LTC3676HUJ#PBF includes various protection features like overvoltage protection, undervoltage lockout, and thermal shutdown.

  7. Q: Can LTC3676HUJ#PBF be controlled remotely? A: Yes, LTC3676HUJ#PBF features an I2C interface, enabling remote control and monitoring of the device.

  8. Q: What is the input voltage range supported by LTC3676HUJ#PBF? A: LTC3676HUJ#PBF can operate with an input voltage range of 2.7V to 5.5V.

  9. Q: Is LTC3676HUJ#PBF suitable for battery-powered applications? A: Yes, LTC3676HUJ#PBF is designed to be highly efficient, making it suitable for battery-powered applications where power consumption is critical.

  10. Q: Are there any evaluation boards or reference designs available for LTC3676HUJ#PBF? A: Yes, Linear Technology (now part of Analog Devices) provides evaluation boards and reference designs that can help in the development and implementation of LTC3676HUJ#PBF in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It is always recommended to refer to the datasheet and application notes for detailed information and guidelines.