Littelfuse Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
15KPA36A-B
Ver Detalle Hojas de datos

15KPA36A-B Product Overview

Introduction

The 15KPA36A-B is a high-performance transient voltage suppressor (TVS) diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. This entry provides a comprehensive overview of the 15KPA36A-B, including its product category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Category

The 15KPA36A-B belongs to the TVS diode category, specifically designed for surge protection in various electronic applications.

Basic Information Overview

  • Use: Surge protection against transient voltage events.
  • Characteristics: High surge capability, low clamping voltage, fast response time.
  • Package: Axial leaded package.
  • Essence: Provides robust protection for sensitive electronic circuits.
  • Packaging/Quantity: Available in tape and reel packaging with varying quantities.

Specifications

  • Peak Pulse Power: 15000W
  • Standoff Voltage: 30.8V
  • Breakdown Voltage: 34.2V
  • Maximum Clamping Voltage: 49.9V
  • Operating Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The 15KPA36A-B features an axial leaded package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient voltages to safe levels.
  • Fast Response Time: Rapid reaction to transient events for enhanced protection.
  • High Surge Capability: Capable of handling large surge currents without degradation.

Advantages and Disadvantages

Advantages

  • High surge capability ensures reliable protection.
  • Low clamping voltage minimizes stress on protected circuits.
  • Fast response time for immediate protection against transient events.

Disadvantages

  • Sensitive to reverse polarity connection.
  • Requires careful consideration of mounting and layout for optimal performance.

Working Principles

The 15KPA36A-B operates based on the principle of avalanche breakdown, where it rapidly conducts excess current when the voltage exceeds the breakdown voltage, effectively diverting the transient energy away from the protected circuit.

Detailed Application Field Plans

The 15KPA36A-B is widely used in various applications, including: - Power supplies - Telecommunication equipment - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

  • 15KPA33A-B: Lower standoff voltage variant suitable for specific applications.
  • 15KPA39A-B: Higher standoff voltage variant for increased surge protection.

In conclusion, the 15KPA36A-B offers robust transient voltage suppression capabilities, making it an essential component in safeguarding sensitive electronic equipment from damaging voltage transients.

Word count: 410

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de 15KPA36A-B en soluciones técnicas

  1. What is the 15KPA36A-B component used for in technical solutions?

    • The 15KPA36A-B is a transient voltage suppressor diode designed to protect electronic circuits from overvoltage transients.

  2. What is the maximum peak pulse power of the 15KPA36A-B?

    • The maximum peak pulse power of the 15KPA36A-B is 15000 watts.

  3. What is the breakdown voltage of the 15KPA36A-B?

    • The breakdown voltage of the 15KPA36A-B is 36 volts.

  4. What are the typical applications of the 15KPA36A-B in technical solutions?

    • Typical applications include surge protection in telecommunications equipment, industrial electronics, and automotive systems.

  5. What is the operating temperature range of the 15KPA36A-B?

    • The 15KPA36A-B operates within a temperature range of -55°C to +175°C.

  6. What is the response time of the 15KPA36A-B to transient voltage spikes?

    • The response time of the 15KPA36A-B is very fast, typically in the nanosecond range.

  7. Does the 15KPA36A-B require any external components for proper operation?

    • No, the 15KPA36A-B does not require any external components for its basic operation.

  8. Can the 15KPA36A-B be used in high-frequency applications?

    • Yes, the 15KPA36A-B can be used in high-frequency applications due to its fast response time.

  9. What is the packaging type of the 15KPA36A-B?

    • The 15KPA36A-B is available in a molded epoxy package for easy integration into circuit designs.

  10. Is the 15KPA36A-B RoHS compliant?

    • Yes, the 15KPA36A-B is RoHS compliant, making it suitable for use in environmentally conscious designs.