Consulte las especificaciones para obtener detalles del producto.
30KPA84A-B Product Overview
Introduction
The 30KPA84A-B is a specialized electronic component designed for use in various electrical and electronic systems. This entry provides an in-depth overview of the product, including its category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Basic Information Overview
- Category: Electronic Component
- Use: Surge Protection
- Characteristics: High Power Handling, Fast Response Time
- Package: Axial Lead
- Essence: Protects Against Voltage Surges
- Packaging/Quantity: Bulk Packaging, Quantity Varies
Specifications
The 30KPA84A-B is designed to meet the following specifications: - Peak Pulse Power: 30000 W - Breakdown Voltage Range: 71.1 V to 78.7 V - Maximum Clamping Voltage: 115 V - Operating Temperature Range: -55°C to +175°C - Storage Temperature Range: -55°C to +175°C
Detailed Pin Configuration
The detailed pin configuration of the 30KPA84A-B is as follows: - Pin 1: Anode - Pin 2: Cathode
Functional Features
- Surge Protection: Provides robust protection against voltage surges.
- High Power Handling: Capable of handling high power transient events.
- Fast Response Time: Rapidly responds to transient voltage spikes.
Advantages and Disadvantages
Advantages
- High power handling capacity
- Fast response time
- Robust surge protection
Disadvantages
- Bulk packaging may not be suitable for all applications
- Limited breakdown voltage range
Working Principles
The 30KPA84A-B operates on the principle of avalanche breakdown, where it rapidly clamps transient voltages to protect downstream electronic components from damage.
Detailed Application Field Plans
The 30KPA84A-B is ideally suited for use in the following application fields: - Industrial Equipment - Telecommunications Systems - Power Distribution Units - Automotive Electronics
Detailed and Complete Alternative Models
For applications requiring similar surge protection capabilities, the following alternative models can be considered: - 30KPA Series (e.g., 30KPA72A-B, 30KPA90A-B) - P6KE Series (e.g., P6KE75CA, P6KE100CA)
In conclusion, the 30KPA84A-B offers robust surge protection with high power handling and fast response time, making it an essential component in various electrical and electronic systems.
[Word Count: 398]
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de 30KPA84A-B en soluciones técnicas
What is the 30KPA84A-B used for in technical solutions?
- The 30KPA84A-B is commonly used as a transient voltage suppressor diode to protect sensitive electronic components from voltage spikes and surges.
What is the maximum peak pulse power of the 30KPA84A-B?
- The 30KPA84A-B has a maximum peak pulse power of 30000 watts, making it suitable for high-power applications.
What is the breakdown voltage of the 30KPA84A-B?
- The breakdown voltage of the 30KPA84A-B is 84 volts, allowing it to clamp transient voltages above this level.
Can the 30KPA84A-B be used for overvoltage protection in power supply circuits?
- Yes, the 30KPA84A-B is commonly employed for overvoltage protection in power supply circuits due to its high power handling capability.
What are the typical applications of the 30KPA84A-B in automotive electronics?
- In automotive electronics, the 30KPA84A-B is often used to safeguard sensitive electronic control units (ECUs) from voltage transients caused by load dump and other electrical disturbances.
Does the 30KPA84A-B provide bidirectional protection?
- Yes, the 30KPA84A-B offers bidirectional transient voltage suppression, making it suitable for protecting both positive and negative voltage rails.
What is the response time of the 30KPA84A-B during a transient event?
- The 30KPA84A-B has a fast response time, typically in the nanosecond range, ensuring rapid clamping of transient voltages to protect downstream circuitry.
Is the 30KPA84A-B suitable for use in telecommunications equipment?
- Yes, the 30KPA84A-B is commonly utilized in telecommunications equipment to protect against lightning-induced surges and other voltage transients.
What are the environmental considerations for using the 30KPA84A-B in outdoor applications?
- The 30KPA84A-B is designed to meet industry standards for environmental performance, making it suitable for outdoor applications where exposure to moisture and temperature variations may occur.
Are there any recommended layout or mounting considerations when using the 30KPA84A-B on a printed circuit board?
- It is advisable to follow recommended PCB layout guidelines and ensure proper thermal management to maximize the effectiveness of the 30KPA84A-B in suppressing transient voltages.