Littelfuse Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
P6SMBJ33CA
Ver Detalle Hojas de datos

P6SMBJ33CA - Product Overview and Analysis

Introduction

The P6SMBJ33CA is a diode belonging to the category of transient voltage suppressor (TVS) diodes. These diodes are widely used in electronic circuits to protect sensitive components from voltage spikes and transients. The P6SMBJ33CA is specifically designed to provide protection for sensitive electronics against voltage transients induced by lightning, inductive load switching, and electrostatic discharge.

Basic Information Overview

  • Category: Transient Voltage Suppressor (TVS) Diode
  • Use: Protection against voltage transients induced by lightning, inductive load switching, and electrostatic discharge
  • Characteristics: Fast response time, low clamping voltage, high surge current capability
  • Package: SMB (DO-214AA)
  • Essence: Safeguarding sensitive electronic components
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Voltage - Reverse Standoff (Typ): 28.2V
  • Voltage - Breakdown: 31.4V
  • Clamping Voltage: 45.7V
  • Peak Pulse Current: 57.1A
  • Capacitance: 150pF
  • Operating Temperature: -55°C to 150°C
  • Mounting Type: Surface Mount
  • Package / Case: DO-214AA (SMB)

Detailed Pin Configuration

The P6SMBJ33CA TVS diode typically consists of two pins, anode, and cathode. The anode is connected to the circuit node that requires protection, while the cathode is connected to the ground or reference potential.

Functional Features

  • Fast Response Time: Rapid reaction to voltage transients
  • Low Clamping Voltage: Limits the voltage across the protected circuit
  • High Surge Current Capability: Ability to handle large transient currents

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Compact surface-mount package
  • Wide operating temperature range

Disadvantages

  • Limited to low voltage applications
  • Requires careful consideration of placement in the circuit for optimal protection

Working Principles

The P6SMBJ33CA operates based on the principle of avalanche breakdown. When a voltage transient occurs, the diode rapidly conducts, diverting the excess current away from the protected circuit. This action limits the voltage across the circuit, preventing damage to sensitive components.

Detailed Application Field Plans

The P6SMBJ33CA is commonly used in various electronic systems including: - Power supplies - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • P6SMBJ10CA: Lower voltage rating
  • P6SMBJ58CA: Higher voltage rating
  • P6SMBJ24CA: Intermediate voltage rating

In conclusion, the P6SMBJ33CA TVS diode offers effective protection against voltage transients in a wide range of electronic applications. Its fast response time, low clamping voltage, and high surge current capability make it a valuable component in safeguarding sensitive electronics.

Word Count: 398

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de P6SMBJ33CA en soluciones técnicas

  1. What is the P6SMBJ33CA used for?

    • The P6SMBJ33CA is a transient voltage suppressor diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

  2. What is the maximum peak pulse power of the P6SMBJ33CA?

    • The maximum peak pulse power of the P6SMBJ33CA is 600 watts.

  3. What is the breakdown voltage of the P6SMBJ33CA?

    • The breakdown voltage of the P6SMBJ33CA is 33 volts.

  4. What is the typical clamping voltage of the P6SMBJ33CA?

    • The typical clamping voltage of the P6SMBJ33CA is 53.3 volts at 10A.

  5. What are the applications of P6SMBJ33CA in technical solutions?

    • The P6SMBJ33CA is commonly used in surge protection for telecommunications equipment, automotive electronics, industrial control systems, and power supplies.

  6. What is the operating temperature range of the P6SMBJ33CA?

    • The operating temperature range of the P6SMBJ33CA is -55°C to +150°C.

  7. What is the package type of the P6SMBJ33CA?

    • The P6SMBJ33CA is available in a DO-214AA (SMB) package.

  8. What is the response time of the P6SMBJ33CA?

    • The response time of the P6SMBJ33CA is typically less than 1 picosecond.

  9. How does the P6SMBJ33CA provide overvoltage protection?

    • The P6SMBJ33CA diverts excess current away from sensitive components, limiting the voltage across the protected device during transient voltage events.

  10. Can the P6SMBJ33CA be used in high-speed data line protection?

    • Yes, the P6SMBJ33CA is suitable for providing transient voltage protection in high-speed data lines such as Ethernet, USB, and HDMI interfaces.