MAX1586AETM+TG51

Product Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High-efficiency, Low-power, Step-up DC-DC Converter
• Package: 12-pin TDFN (Thin Dual Flat No-Lead) package
• Essence: The MAX1586AETM+TG51 is a compact and efficient step-up DC-DC converter designed for low-power applications.
• Packaging/Quantity: Available in tape and reel packaging with 2500 units per reel.

Specifications

• Input Voltage Range: 2.5V to 5.5V
• Output Voltage Range: Up to 28V
• Switching Frequency: 1MHz
• Efficiency: Up to 90%
• Operating Temperature Range: -40°C to +85°C
• Shutdown Current: <1µA

Pin Configuration

The MAX1586AETM+TG51 has a total of 12 pins arranged as follows:

```

---

| | --| VOUT | --| FB | --| EN | --| GND | --| LX | --| PG | --| SS/TR | --| VIN | --| | |___________| ```

Functional Features

1. High Efficiency: The MAX1586AETM+TG51 utilizes advanced control techniques to achieve high efficiency, minimizing power losses.
2. Low-Power Operation: Designed for low-power applications, the device consumes minimal power during operation and shutdown.
3. Step-Up Conversion: The IC efficiently steps up the input voltage to a higher output voltage, suitable for various applications.
4. Wide Input Voltage Range: The device can operate from a wide range of input voltages, making it versatile for different power sources.
5. Protection Features: The MAX1586AETM+TG51 incorporates various protection features like overcurrent and thermal shutdown to ensure safe operation.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption. - Compact size and low-profile package enable space-saving designs. - Wide input voltage range allows for flexibility in power source selection. - Protection features enhance reliability and safety.

Disadvantages: - Limited output current capability may not be suitable for high-power applications. - Higher cost compared to some alternative models.

Working Principles

The MAX1586AETM+TG51 is a step-up DC-DC converter that utilizes a switching regulator topology. It converts the input voltage to a higher output voltage by controlling the duty cycle of an internal switch. This switching action minimizes power losses and maximizes efficiency. The device employs a feedback mechanism to regulate the output voltage and maintain stability under varying load conditions.

Application Field Plans

The MAX1586AETM+TG51 is well-suited for a wide range of low-power applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT (Internet of Things) devices - Wearable devices - Sensor networks

Alternative Models

1. MAX1587AETM+TG51: Similar specifications with enhanced output current capability.
2. MAX1588AETM+TG51: Higher output voltage range with comparable efficiency.
3. MAX1589AETM+TG51: Lower input voltage range for specific applications.

These alternative models offer similar functionality and can be considered based on specific requirements and constraints.

In conclusion, the MAX1586AETM+TG51 is a compact and efficient step-up DC-DC converter designed for low-power applications. Its high efficiency, wide input voltage range, and protection features make it suitable for various portable and low-power electronic devices.