Meixin Integrated
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MAX3421EETJ+T
Ver Detalle Hojas de datos

MAX3421EETJ+T

Introduction

The MAX3421EETJ+T is a versatile USB peripheral/host controller that belongs to the category of integrated circuits. This device is widely used in various electronic applications due to its unique characteristics and features.

Basic Information Overview

  • Category: Integrated Circuits
  • Use: USB Peripheral/Host Controller
  • Characteristics: Versatile, High Performance
  • Package: 32-TQFN (5x5)
  • Essence: USB Interface Controller
  • Packaging/Quantity: Tape & Reel (2500 units per reel)

Specifications

  • Operating Voltage: 3.3V
  • Operating Temperature: -40°C to +85°C
  • Data Rate: Up to 12Mbps
  • Interface: SPI

Detailed Pin Configuration

The MAX3421EETJ+T features a 32-pin TQFN package with the following pin configuration: 1. VBUS 2. D+ 3. D- 4. GND 5. INT 6. GPX 7. SCLK 8. MOSI 9. MISO 10. SS 11. GP0 12. GP1 13. GP2 14. GP3 15. GP4 16. GP5 17. GP6 18. GP7 19. GP8 20. GP9 21. GP10 22. GP11 23. GP12 24. GP13 25. GP14 26. GP15 27. GP16 28. GP17 29. GP18 30. GP19 31. GP20 32. RESET

Functional Features

  • USB Peripheral/Host Controller
  • On-Chip USB Transceiver
  • SPI Interface for Communication
  • Integrated 3.3V Regulator
  • Flexible General-Purpose I/O Pins

Advantages and Disadvantages

Advantages

  • Versatile USB Interface Controller
  • High Performance Data Transfer
  • Integrated Transceiver Simplifies Design
  • Flexible GPIO Pins for Customization

Disadvantages

  • Limited Operating Voltage Range (3.3V)
  • Requires External Crystal Oscillator

Working Principles

The MAX3421EETJ+T operates as a USB peripheral/host controller by interfacing with external devices through the USB protocol. It utilizes an integrated transceiver and SPI interface to facilitate communication between the host system and connected USB peripherals.

Detailed Application Field Plans

The MAX3421EETJ+T finds extensive application in various fields including: - Consumer Electronics - Industrial Automation - Embedded Systems - Medical Devices - Automotive Applications

Detailed and Complete Alternative Models

Some alternative models to the MAX3421EETJ+T include: - FT232H from FTDI - MCP2221A from Microchip - CY7C65213 from Cypress Semiconductor

In conclusion, the MAX3421EETJ+T is a highly capable USB peripheral/host controller with versatile features and wide-ranging applications in the field of electronics.

[Word Count: 413]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MAX3421EETJ+T en soluciones técnicas

Sure, here are 10 common questions and answers related to the application of MAX3421EETJ+T:

  1. What is the MAX3421EETJ+T?

    • The MAX3421EETJ+T is a USB peripheral/host controller in a small package, designed for use in various embedded applications.

  2. What are the key features of the MAX3421EETJ+T?

    • It features a built-in USB transceiver, supports USB 2.0, and can operate as a USB host or peripheral device.

  3. How can I interface the MAX3421EETJ+T with a microcontroller?

    • The MAX3421EETJ+T communicates with a microcontroller using SPI (Serial Peripheral Interface) protocol.

  4. Can the MAX3421EETJ+T be used to add USB functionality to my embedded system?

    • Yes, it can be used to add USB host or peripheral capabilities to your embedded system.

  5. What are the typical applications of the MAX3421EETJ+T?

    • It is commonly used in applications such as USB-to-serial converters, USB-based data acquisition systems, and USB peripherals.

  6. What is the maximum data transfer rate supported by the MAX3421EETJ+T?

    • The MAX3421EETJ+T supports full-speed (12 Mbps) and low-speed (1.5 Mbps) USB data transfer rates.

  7. Does the MAX3421EETJ+T require external components for operation?

    • Yes, it requires external crystal oscillators and passive components for proper operation.

  8. Can the MAX3421EETJ+T be powered from a single supply voltage?

    • Yes, it can be powered from a single 3.3V supply voltage.

  9. What are the programming considerations when using the MAX3421EETJ+T?

    • You need to configure the MAX3421EETJ+T through SPI commands to set its operating mode and handle USB transactions.

  10. Where can I find more detailed technical information about the MAX3421EETJ+T?

    • You can refer to the MAX3421EETJ+T datasheet and application notes provided by the manufacturer for comprehensive technical details and application examples.

I hope these answers provide the information you were looking for! If you have any further questions, feel free to ask.