MAX5061AUE+TG002

Product Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: TSSOP-16
• Essence: Voltage Regulator
• Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Range: 0.6V to 3.3V
• Maximum Output Current: 1A
• Quiescent Current: 40µA
• Switching Frequency: 1.2MHz
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MAX5061AUE+TG002 has a TSSOP-16 package with the following pin configuration:

1. EN (Enable)
2. FB (Feedback)
3. GND (Ground)
4. SW (Switch)
5. PGND (Power Ground)
6. LX (Inductor Connection)
7. LX (Inductor Connection)
8. LX (Inductor Connection)
9. LX (Inductor Connection)
10. VOUT (Output Voltage)
11. VOUT (Output Voltage)
12. VOUT (Output Voltage)
13. VOUT (Output Voltage)
14. VIN (Input Voltage)
15. VIN (Input Voltage)
16. VIN (Input Voltage)

Functional Features

• High Efficiency: The MAX5061AUE+TG002 offers high efficiency power conversion, minimizing energy loss.
• Low Power Consumption: With a quiescent current of only 40µA, it ensures minimal power consumption during standby or low load conditions.
• Wide Input Voltage Range: It can accept input voltages ranging from 2.7V to 5.5V, making it suitable for various applications.
• Adjustable Output Voltage: The output voltage can be adjusted from 0.6V to 3.3V, providing flexibility for different system requirements.
• Overcurrent Protection: The IC incorporates overcurrent protection to safeguard the circuit and connected devices.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption during standby - Wide input voltage range - Adjustable output voltage - Overcurrent protection

Disadvantages: - Limited maximum output current (1A)

Working Principles

The MAX5061AUE+TG002 is a voltage regulator that converts an input voltage into a regulated output voltage. It utilizes a switching regulator topology to achieve high efficiency. The input voltage is first stepped down using an inductor and switched on and off at a high frequency. This switched voltage is then filtered and regulated to provide a stable output voltage.

Detailed Application Field Plans

The MAX5061AUE+TG002 is commonly used in various applications, including but not limited to:

1. Portable Electronic Devices: It can be used to regulate the power supply for smartphones, tablets, portable media players, etc.
2. IoT Devices: It is suitable for powering IoT devices such as sensors, wireless modules, and microcontrollers.
3. Battery-Powered Systems: The low power consumption and wide input voltage range make it ideal for battery-powered systems like wearables and handheld devices.
4. Industrial Control Systems: It can be employed in industrial control systems that require efficient power management.

Detailed and Complete Alternative Models

1. MAX5060AUE+TG002: Similar to MAX5061AUE+TG002, but with a lower maximum output current of 500mA.
2. MAX5062AUE+TG002: Similar to MAX5061AUE+TG002, but with a higher maximum output current of 2A.
3. MAX5063AUE+TG002: Similar to MAX5061AUE+TG002, but with additional features such as adjustable soft-start and thermal shutdown protection.

Note: The above alternative models are from the same MAX5060 series and offer similar functionality with slight variations in specifications.

This entry provides an overview of the MAX5061AUE+TG002 voltage regulator, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.