Meixin Integrated
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MAX5068BAUE+T
Ver Detalle Hojas de datos

MAX5068BAUE+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current, Wide Input Voltage Range
  • Package: TSSOP-16
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.6V to 55V
  • Maximum Output Current: 2A
  • Quiescent Current: 17µA
  • Switching Frequency: 100kHz to 2MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. VIN: Input Voltage Pin
  2. GND: Ground Pin
  3. FB: Feedback Pin
  4. EN: Enable Pin
  5. SS/TR: Soft-Start/Tracking Pin
  6. VCC: Supply Voltage Pin
  7. PGND: Power Ground Pin
  8. SW: Switch Node Pin
  9. BST: Bootstrap Pin
  10. COMP: Compensation Pin
  11. SS/TR: Soft-Start/Tracking Pin
  12. AGND: Analog Ground Pin
  13. PGND: Power Ground Pin
  14. VOUT: Output Voltage Pin
  15. VOUT: Output Voltage Pin
  16. VCC: Supply Voltage Pin

Functional Features

  • High Efficiency: The MAX5068BAUE+T offers high efficiency power conversion, minimizing energy loss during operation.
  • Low Quiescent Current: With a quiescent current of only 17µA, the IC consumes minimal power when in standby mode.
  • Wide Input Voltage Range: The device can accept input voltages ranging from 4.5V to 60V, making it suitable for various applications.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low quiescent current consumption - Wide input voltage range

Disadvantages: - Limited maximum output current (2A)

Working Principles

The MAX5068BAUE+T is a voltage regulator IC that utilizes a switching regulator topology to efficiently convert the input voltage to a regulated output voltage. It employs a pulse-width modulation (PWM) control scheme to regulate the output voltage based on the feedback received from the FB pin. The EN pin allows for enable/disable control, while the SS/TR pin provides soft-start and tracking functionality.

Detailed Application Field Plans

The MAX5068BAUE+T finds applications in various fields, including but not limited to:

  1. Automotive: Power management in automotive systems, such as infotainment systems, lighting, and motor control.
  2. Industrial: Voltage regulation in industrial equipment, including factory automation, robotics, and power supplies.
  3. Telecommunications: Power management for telecommunications infrastructure, such as base stations and network equipment.
  4. Consumer Electronics: Voltage regulation in consumer electronic devices, such as smartphones, tablets, and portable audio players.

Detailed and Complete Alternative Models

  1. MAX5069BAUE+T: Similar to MAX5068BAUE+T, but with a higher maximum output current of 3A.
  2. MAX5070BAUE+T: Similar to MAX5068BAUE+T, but with a lower quiescent current of 10µA.
  3. MAX5071BAUE+T: Similar to MAX5068BAUE+T, but with a wider input voltage range of 4.5V to 75V.

(Note: The above alternative models are just examples and not an exhaustive list.)

This concludes the encyclopedia entry for MAX5068BAUE+T, providing an overview of its product details, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MAX5068BAUE+T en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of MAX5068BAUE+T in technical solutions:

  1. Q: What is the MAX5068BAUE+T? A: The MAX5068BAUE+T is a high-efficiency, synchronous step-down DC-DC converter IC.

  2. Q: What is the input voltage range of the MAX5068BAUE+T? A: The input voltage range of the MAX5068BAUE+T is typically between 4.5V and 28V.

  3. Q: What is the output voltage range of the MAX5068BAUE+T? A: The output voltage range of the MAX5068BAUE+T can be adjusted from 0.6V to 90% of the input voltage.

  4. Q: What is the maximum output current of the MAX5068BAUE+T? A: The maximum output current of the MAX5068BAUE+T is typically 3A.

  5. Q: Does the MAX5068BAUE+T require an external compensation network? A: No, the MAX5068BAUE+T has an internal compensation network, eliminating the need for an external one.

  6. Q: Can the MAX5068BAUE+T operate in a wide temperature range? A: Yes, the MAX5068BAUE+T is designed to operate in a temperature range of -40°C to +125°C.

  7. Q: Does the MAX5068BAUE+T have built-in protection features? A: Yes, the MAX5068BAUE+T includes overcurrent protection, thermal shutdown, and undervoltage lockout features.

  8. Q: What type of package does the MAX5068BAUE+T come in? A: The MAX5068BAUE+T is available in a 16-pin TSSOP package.

  9. Q: Can the MAX5068BAUE+T be used in battery-powered applications? A: Yes, the MAX5068BAUE+T has a low quiescent current and can be used in battery-powered applications.

  10. Q: Are there any evaluation boards or reference designs available for the MAX5068BAUE+T? A: Yes, Maxim Integrated provides evaluation kits and reference designs to help with the implementation of the MAX5068BAUE+T in various applications.

Please note that these answers are general and may vary depending on specific application requirements.