MAX6315US46D2+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Voltage Monitor and Reset Circuit
• Characteristics: Low-power, precision voltage monitoring, reset output
• Package: SOT23-5
• Essence: Provides accurate monitoring and reset functionality for electronic systems
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Supply Voltage Range: 1.6V to 5.5V
• Reset Threshold Options: 4.63V, 4.38V, 4.00V, 3.08V, 2.93V, 2.63V, 2.32V, 2.00V
• Reset Timeout Period: 140ms (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX6315US46D2+T IC has a total of five pins:

1. GND: Ground connection.
2. MR: Active-low manual reset input. Pulling this pin low resets the device.
3. RESET: Active-low reset output. This pin goes low when the monitored voltage drops below the threshold.
4. VCC: Positive supply voltage input.
5. NC: No connect pin.

Functional Features

• Accurate voltage monitoring: The MAX6315US46D2+T monitors the supply voltage and provides a reset signal when it falls below a specified threshold.
• Manual reset capability: The device can be manually reset by pulling the MR pin low.
• Low-power operation: Designed for low-power applications, the IC consumes minimal power during operation.
• Precision voltage reference: The integrated voltage reference ensures accurate monitoring and reliable reset functionality.

Advantages and Disadvantages

Advantages: - Accurate voltage monitoring helps prevent system malfunctions. - Low-power operation extends battery life in portable devices. - Manual reset capability provides flexibility in system design.

Disadvantages: - Limited number of reset threshold options. - SOT23-5 package may not be suitable for all applications requiring voltage monitoring.

Working Principles

The MAX6315US46D2+T operates by comparing the supply voltage with a reference voltage. When the supply voltage drops below the selected threshold, the reset output is activated, indicating a power failure or low voltage condition. The device continuously monitors the voltage and keeps the reset output active until the supply voltage rises above the threshold again. The manual reset input allows for immediate system reset when required.

Detailed Application Field Plans

The MAX6315US46D2+T is widely used in various electronic systems that require reliable voltage monitoring and reset functionality. Some common application fields include:

1. Microcontrollers: Ensures proper system initialization and prevents erratic behavior during power-up or brownout conditions.
2. Embedded Systems: Provides a reliable reset signal to restart the system in case of power failures or voltage drops.
3. Battery-Powered Devices: Monitors battery voltage and triggers a reset when the battery level is critically low.
4. Industrial Control Systems: Protects sensitive equipment from damage due to voltage fluctuations or power interruptions.
5. Automotive Electronics: Ensures proper functioning of critical systems by monitoring voltage levels and initiating resets if necessary.

Detailed and Complete Alternative Models

1. MAX6316: Similar to MAX6315US46D2+T but offers additional reset timeout period options.
2. MAX6381: Voltage monitor and reset circuit with adjustable reset thresholds.
3. MAX811: Microprocessor supervisory circuit with watchdog timer and manual reset input.

These alternative models provide similar functionality and can be considered based on specific application requirements.

Word count: 510 words