Consulte las especificaciones para obtener detalles del producto.
MAX6760TATAD3+T
Product Overview
- Category: Integrated Circuit (IC)
- Use: Power Management
- Characteristics: High Efficiency, Low Power Consumption
- Package: TDFN-8 (Thin Dual Flat No-Lead)
- Essence: Voltage Regulator
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
- Input Voltage Range: 2.7V to 5.5V
- Output Voltage Range: 0.6V to 3.3V
- Output Current: Up to 1A
- Quiescent Current: 17µA (typical)
- Dropout Voltage: 120mV at 500mA
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The MAX6760TATAD3+T has a total of 8 pins:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- FB: Feedback pin
- VOUT: Output voltage pin
- PG: Power Good pin
- SS/TR: Soft-start/Tracking pin
- BST: Boost pin
Functional Features
- High efficiency power management solution
- Low dropout voltage for improved performance
- Wide input voltage range for versatility
- Power good output for system monitoring
- Soft-start and tracking capability for controlled startup
Advantages and Disadvantages
Advantages: - High efficiency leads to reduced power consumption - Wide input voltage range allows for compatibility with various power sources - Power good output enables system monitoring and fault detection - Soft-start feature ensures smooth and controlled startup
Disadvantages: - Limited output current capacity (up to 1A) - Dropout voltage may affect performance in low voltage applications
Working Principles
The MAX6760TATAD3+T is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V into a regulated output voltage between 0.6V and 3.3V. It achieves high efficiency by minimizing power dissipation through low dropout voltage. The device operates by comparing the feedback voltage (FB) with a reference voltage, adjusting the output voltage accordingly. The enable (EN) pin controls the operation of the regulator.
Detailed Application Field Plans
The MAX6760TATAD3+T is commonly used in various applications requiring efficient power management. Some potential application fields include:
- Portable Electronics: Smartphones, tablets, portable gaming devices
- IoT Devices: Wearable devices, smart home sensors, connected appliances
- Battery-Powered Systems: Wireless communication devices, handheld instruments
- Industrial Control Systems: PLCs (Programmable Logic Controllers), motor control systems
- Automotive Electronics: Infotainment systems, dashboard displays, lighting control
Detailed and Complete Alternative Models
- MAX6761TATAD3+T
- MAX6762TATAD3+T
- MAX6763TATAD3+T
- MAX6764TATAD3+T
- MAX6765TATAD3+T
These alternative models are part of the same series and offer similar functionality with slight variations in specifications or package options.
Note: This entry contains 439 words. Additional content is required to reach the required 1100 words.
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MAX6760TATAD3+T en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of MAX6760TATAD3+T in technical solutions:
1. What is the MAX6760TATAD3+T? The MAX6760TATAD3+T is a voltage monitor and sequencer IC (integrated circuit) designed for use in various technical solutions.
2. What is the purpose of the MAX6760TATAD3+T? The purpose of this IC is to monitor and control the power supply voltages in a system, ensuring proper sequencing and protection.
3. What are the key features of the MAX6760TATAD3+T? Some key features include undervoltage/overvoltage detection, adjustable thresholds, power-on reset generation, and fault reporting capabilities.
4. How does the MAX6760TATAD3+T help with power supply sequencing? It provides programmable delay times between different power supplies, allowing for proper sequencing to prevent potential damage or instability.
5. Can the MAX6760TATAD3+T be used in battery-powered applications? Yes, it can be used in battery-powered applications as it has low quiescent current and operates over a wide voltage range.
6. Is the MAX6760TATAD3+T suitable for automotive applications? Yes, it is suitable for automotive applications as it meets the necessary automotive standards and has built-in fault detection and reporting features.
7. How many power supplies can the MAX6760TATAD3+T monitor and sequence? It can monitor and sequence up to four power supplies simultaneously.
8. Can the MAX6760TATAD3+T be programmed for custom voltage thresholds? Yes, it can be programmed using external resistors to set custom voltage thresholds according to the specific requirements of the application.
9. Does the MAX6760TATAD3+T have any built-in protection features? Yes, it has built-in overvoltage and undervoltage protection, which can help prevent damage to the system during abnormal voltage conditions.
10. What is the package type of the MAX6760TATAD3+T? The MAX6760TATAD3+T comes in a 6-pin SOT23 package, which is small and suitable for space-constrained applications.
Please note that these questions and answers are based on general information about the MAX6760TATAD3+T and may vary depending on specific application requirements.