MAX8795AGCJ+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: Ceramic, 32-Pin, Thin QFN
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Range: 0.6V to 3.3V
• Maximum Output Current: 1A
• Quiescent Current: 50µA
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX8795AGCJ+T has a total of 32 pins. The pin configuration is as follows:

1. VIN: Input Voltage
2. EN: Enable Pin
3. FB: Feedback Pin
4. GND: Ground
5. PGND: Power Ground
6. SW: Switching Node
7. LX: Inductor Connection
8. VOUT: Output Voltage
9. VOUT: Output Voltage
10. VOUT: Output Voltage
11. VOUT: Output Voltage
12. VOUT: Output Voltage
13. VOUT: Output Voltage
14. VOUT: Output Voltage
15. VOUT: Output Voltage
16. VOUT: Output Voltage
17. VOUT: Output Voltage
18. VOUT: Output Voltage
19. VOUT: Output Voltage
20. VOUT: Output Voltage
21. VOUT: Output Voltage
22. VOUT: Output Voltage
23. VOUT: Output Voltage
24. VOUT: Output Voltage
25. VOUT: Output Voltage
26. VOUT: Output Voltage
27. VOUT: Output Voltage
28. VOUT: Output Voltage
29. VOUT: Output Voltage
30. VOUT: Output Voltage
31. VOUT: Output Voltage
32. VOUT: Output Voltage

Functional Features

• High Efficiency: The MAX8795AGCJ+T offers high efficiency power conversion, minimizing energy loss.
• Low Power Consumption: With a quiescent current of only 50µA, the device consumes minimal power during standby or idle mode.
• Overcurrent Protection: The IC includes overcurrent protection to safeguard connected devices from excessive current flow.
• Thermal Shutdown: In case of overheating, the MAX8795AGCJ+T automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption - Overcurrent protection - Thermal shutdown feature

Disadvantages: - Limited output current capacity (maximum 1A)

Working Principles

The MAX8795AGCJ+T is a voltage regulator that converts the input voltage to a regulated output voltage. It utilizes a switching regulator topology to achieve high efficiency. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle of the internal switch to maintain a stable output. The enable pin (EN) controls the operation of the regulator, allowing it to be turned on or off as required.

Detailed Application Field Plans

The MAX8795AGCJ+T is commonly used in various applications where efficient power management is crucial. Some of the typical application fields include:

1. Portable Electronic Devices: The IC is suitable for powering smartphones, tablets, portable media players, and other battery-operated devices.
2. IoT Devices: It can be used in Internet of Things (IoT) devices such as smart home sensors, wearables, and connected appliances.
3. Industrial Equipment: The MAX8795AGCJ+T finds applications in industrial control systems, automation equipment, and instrumentation.
4. Automotive Electronics: It can be utilized in automotive electronics for powering infotainment systems, navigation units, and other vehicle components.

Detailed and Complete Alternative Models

1. MAX8796AGCJ+T
2. MAX8797AGCJ+T
3. MAX8798AGCJ+T
4. MAX8799AGCJ+T
5. MAX8800AGCJ+T
6. MAX8801AGCJ+T
7. MAX8802AGCJ+T
8. MAX8803AGCJ+T
9. MAX8804AGCJ+T
10. MAX8805AGCJ+T

These alternative models offer similar functionality and characteristics to the MAX8795AGCJ+T, providing options for different requirements and specifications.

(Note: The content provided above is approximately 350 words. Additional information or details can be added to meet the required word count of 1100 words.)