La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
93AA56B-I/P

93AA56B-I/P

Product Overview

Category:

The 93AA56B-I/P belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use:

It is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, sensors, and communication modules.

Characteristics:

  • Non-volatile memory
  • Small form factor
  • Low power consumption
  • High reliability
  • Wide operating voltage range

Package:

The 93AA56B-I/P is typically available in an 8-pin DIP (Dual Inline Package) or SOIC (Small Outline Integrated Circuit) package.

Essence:

This EEPROM chip provides a reliable and efficient solution for storing critical data in embedded systems.

Packaging/Quantity:

The 93AA56B-I/P is usually packaged in tubes or reels, with quantities varying based on manufacturer specifications.

Specifications

  • Memory Size: 2Kbit (256 x 8)
  • Interface: SPI (Serial Peripheral Interface)
  • Operating Voltage: 1.8V to 5.5V
  • Operating Temperature: -40°C to 85°C
  • Write Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

  1. VCC - Power supply
  2. CS - Chip select
  3. DI - Serial data input
  4. DO - Serial data output
  5. CLK - Clock input
  6. NC - Not connected
  7. GND - Ground
  8. WP - Write protect

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • Enhanced ESD Protection
  • Sequential Read Operation
  • Software and Hardware Write Protection

Advantages

  • Compact size
  • Low power consumption
  • High reliability
  • Flexible interface options
  • Wide operating voltage range

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write speeds compared to volatile memory

Working Principles

The 93AA56B-I/P utilizes a floating gate transistor structure to store data. When a voltage is applied, electrons are trapped in the floating gate, altering the transistor's behavior and allowing for non-volatile data storage.

Detailed Application Field Plans

  • Automotive electronics
  • Industrial control systems
  • Consumer electronics
  • Medical devices
  • IoT (Internet of Things) devices

Detailed and Complete Alternative Models

  • AT24C02C
  • CAT24C02
  • M24C02
  • 24AA02E48T-I/OT

In conclusion, the 93AA56B-I/P EEPROM chip offers a reliable and efficient solution for non-volatile data storage in a wide range of electronic applications. Its compact size, low power consumption, and flexible interface options make it a popular choice for embedded system designers.

[Word Count: 411]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de 93AA56B-I/P en soluciones técnicas

  1. What is the maximum clock frequency for 93AA56B-I/P?
    - The maximum clock frequency for 93AA56B-I/P is 3 MHz.

  2. What is the operating voltage range for 93AA56B-I/P?
    - The operating voltage range for 93AA56B-I/P is 1.8V to 5.5V.

  3. Can 93AA56B-I/P be used in automotive applications?
    - Yes, 93AA56B-I/P is suitable for automotive applications.

  4. What is the typical standby current for 93AA56B-I/P?
    - The typical standby current for 93AA56B-I/P is 1 µA.

  5. Does 93AA56B-I/P support sequential read operation?
    - Yes, 93AA56B-I/P supports sequential read operation.

  6. What is the temperature range for 93AA56B-I/P?
    - The temperature range for 93AA56B-I/P is -40°C to +85°C.

  7. Can 93AA56B-I/P be used in industrial control systems?
    - Yes, 93AA56B-I/P is suitable for use in industrial control systems.

  8. What is the write cycle endurance for 93AA56B-I/P?
    - The write cycle endurance for 93AA56B-I/P is 1,000,000 cycles.

  9. Is 93AA56B-I/P RoHS compliant?
    - Yes, 93AA56B-I/P is RoHS compliant.

  10. What interface does 93AA56B-I/P use for communication?
    - 93AA56B-I/P uses a standard I2C interface for communication.