La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
93AA86CT-I/ST

93AA86CT-I/ST Product Overview

Introduction

The 93AA86CT-I/ST is a non-volatile serial Electrically Erasable Programmable Read-Only Memory (EEPROM) device. This entry provides an in-depth overview of the product, including its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Non-volatile memory
  • Use: Data storage in electronic devices
  • Characteristics: Small form factor, low power consumption, high reliability
  • Package: 8-lead SOIC (Small Outline Integrated Circuit)
  • Essence: Non-volatile data storage
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Memory Size: 16 Kbit (2K x 8)
  • Interface: Microwire
  • Operating Voltage: 1.8V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Time: 3 ms (typical)
  • Data Retention: 200 years (typical)

Detailed Pin Configuration

  1. VCC - Power supply
  2. DI - Data input
  3. DO - Data output
  4. CS - Chip select
  5. SCK - Serial clock
  6. NC - Not connected
  7. NC - Not connected
  8. VSS - Ground

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • Enhanced ESD/Latch-Up Protection
  • More than 1 Million Erase/Write Cycles

Advantages and Disadvantages

Advantages

  • Low power consumption
  • High reliability
  • Small form factor
  • Wide operating voltage range

Disadvantages

  • Limited storage capacity compared to other memory types
  • Slower write times compared to volatile memory

Working Principles

The 93AA86CT-I/ST operates by using an electric field to trap electrons in a floating gate, allowing for non-volatile data storage. When data needs to be written, the device uses a combination of electrical signals to move the trapped electrons, altering the stored information.

Detailed Application Field Plans

The 93AA86CT-I/ST is commonly used in various applications, including: - Automotive electronics - Industrial control systems - Consumer electronics - Medical devices

Detailed and Complete Alternative Models

Some alternative models to the 93AA86CT-I/ST include: - 93LC86C-I/ST - 93C86C-I/ST - 25AA1024-I/ST

In conclusion, the 93AA86CT-I/ST offers reliable non-volatile memory storage with a small form factor and low power consumption, making it suitable for a wide range of electronic applications.

[Word Count: 386]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de 93AA86CT-I/ST en soluciones técnicas

  1. What is the operating voltage range of 93AA86CT-I/ST?
    - The operating voltage range of 93AA86CT-I/ST is 1.8V to 5.5V.

  2. What is the maximum clock frequency supported by 93AA86CT-I/ST?
    - The maximum clock frequency supported by 93AA86CT-I/ST is 3MHz.

  3. Can 93AA86CT-I/ST be used in automotive applications?
    - Yes, 93AA86CT-I/ST is suitable for automotive applications.

  4. Does 93AA86CT-I/ST support write protection?
    - Yes, 93AA86CT-I/ST supports software and hardware write protection.

  5. What is the temperature range for operation of 93AA86CT-I/ST?
    - The temperature range for operation of 93AA86CT-I/ST is -40°C to 85°C.

  6. Is 93AA86CT-I/ST compatible with SPI interface?
    - Yes, 93AA86CT-I/ST is compatible with SPI interface.

  7. Can 93AA86CT-I/ST be used in battery-powered devices?
    - Yes, 93AA86CT-I/ST is suitable for use in battery-powered devices.

  8. What is the typical standby current of 93AA86CT-I/ST?
    - The typical standby current of 93AA86CT-I/ST is 1µA.

  9. Does 93AA86CT-I/ST have ESD protection?
    - Yes, 93AA86CT-I/ST has built-in ESD protection.

  10. Is 93AA86CT-I/ST RoHS compliant?
    - Yes, 93AA86CT-I/ST is RoHS compliant.