Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
93LC86A-I/MS
Ver Detalle Hojas de datos

93LC86A-I/MS

Product Overview

Category

The 93LC86A-I/MS belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

It is commonly used for non-volatile data storage in various electronic devices such as microcontrollers, automotive systems, and consumer electronics.

Characteristics

  • Non-volatile memory
  • Small form factor
  • Low power consumption
  • High reliability

Package

The 93LC86A-I/MS is typically available in a surface-mount package.

Essence

This EEPROM chip provides a reliable and efficient solution for storing critical data in electronic systems.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Memory Size: 16 Kbits
  • Interface: Serial I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to 125°C
  • Write Time: 3.5 ms (typical)
  • Data Retention: 200 years

Detailed Pin Configuration

The 93LC86A-I/MS typically features an 8-pin configuration, including power supply, data input/output, and control pins.

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • Partial Page Writes Allowed
  • Sequential Reads
  • Hardware Write Protection

Advantages and Disadvantages

Advantages

  • Low power consumption
  • High reliability and data retention
  • Small form factor
  • Flexible write modes

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write times compared to volatile memory

Working Principles

The 93LC86A-I/MS operates by using electrical signals to store and retrieve data within its memory cells. It utilizes a serial I2C interface for communication with the host system.

Detailed Application Field Plans

Automotive Systems

The chip can be used for storing vehicle configuration data, error logs, and firmware updates in automotive electronic control units.

Consumer Electronics

In consumer electronics, it can be utilized for storing user settings, encryption keys, and firmware updates in devices such as smart TVs, set-top boxes, and IoT devices.

Industrial Control Systems

For industrial applications, the chip can store calibration data, configuration parameters, and event logs in PLCs, sensors, and monitoring equipment.

Detailed and Complete Alternative Models

  • AT24C16C-SSHM-T
  • CAT24C16WI-GT3
  • M24C16-WMN6TP
  • 24AA16T-I/OT

In conclusion, the 93LC86A-I/MS EEPROM chip offers a reliable and efficient solution for non-volatile data storage in various electronic systems, with its small form factor, low power consumption, and high reliability making it suitable for a wide range of applications.

Word count: 443

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de 93LC86A-I/MS en soluciones técnicas

  1. What is the 93LC86A-I/MS used for?

    • The 93LC86A-I/MS is a serial electrically erasable programmable read-only memory (EEPROM) that is commonly used for non-volatile data storage in various technical solutions.

  2. What is the operating voltage range of the 93LC86A-I/MS?

    • The 93LC86A-I/MS operates within a voltage range of 2.5V to 5.5V.

  3. What is the storage capacity of the 93LC86A-I/MS?

    • The 93LC86A-I/MS has a storage capacity of 16 Kbits, organized as 1,024 words of 16 bits each.

  4. Can the 93LC86A-I/MS be reprogrammed?

    • Yes, the 93LC86A-I/MS can be reprogrammed using its serial interface.

  5. What are the typical applications of the 93LC86A-I/MS?

    • Typical applications include storing configuration data, calibration constants, and other non-volatile parameters in various technical solutions such as embedded systems, industrial control, and automotive electronics.

  6. What is the maximum clock frequency supported by the 93LC86A-I/MS?

    • The 93LC86A-I/MS supports a maximum clock frequency of 2 MHz.

  7. Does the 93LC86A-I/MS have built-in security features?

    • The 93LC86A-I/MS does not have built-in security features and is primarily designed for non-critical data storage.

  8. What is the typical write endurance of the 93LC86A-I/MS?

    • The 93LC86A-I/MS typically has a write endurance of at least 1,000,000 cycles per byte.

  9. Is the 93LC86A-I/MS compatible with standard microcontroller interfaces?

    • Yes, the 93LC86A-I/MS is compatible with standard microcontroller interfaces such as SPI (Serial Peripheral Interface) and I2C (Inter-Integrated Circuit).

  10. What are the temperature range specifications for the 93LC86A-I/MS?

    • The 93LC86A-I/MS is specified to operate over a temperature range of -40°C to +125°C, making it suitable for a wide range of environmental conditions.