Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
AT24C01A-10SI-2.7-T
Ver Detalle Hojas de datos

AT24C01A-10SI-2.7-T

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Non-volatile Electrically Erasable Programmable Read-Only Memory (EEPROM)
  • Characteristics: Low-power, high-reliability, small form factor
  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: Data storage and retrieval in electronic devices
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Part Number: AT24C01A-10SI-2.7-T
  • Memory Size: 1 Kilobit (128 bytes)
  • Operating Voltage: 2.7V to 5.5V
  • Speed Grade: 10ms Write Cycle Time
  • Interface: I2C (Two-wire Serial Interface)

Detailed Pin Configuration

  1. A0: Device Address Input
  2. A1: Device Address Input
  3. A2: Device Address Input
  4. GND: Ground
  5. SDA: Serial Data Input/Output
  6. SCL: Serial Clock Input
  7. WP: Write Protect Input
  8. VCC: Power Supply

Functional Features

  • Non-volatile memory: Retains data even when power is removed
  • Electrically erasable and programmable: Allows for easy modification of stored data
  • Low-power consumption: Suitable for battery-powered devices
  • High reliability: Endurance of up to 1 million write cycles
  • Small form factor: Saves space in electronic designs

Advantages

  • Easy integration into various electronic systems
  • Wide operating voltage range allows compatibility with different power supplies
  • Fast write cycle time enhances data transfer efficiency
  • Compact package size enables use in space-constrained applications

Disadvantages

  • Limited memory capacity (1 Kilobit)
  • Relatively slower write cycle compared to some other EEPROMs
  • Lack of additional features like built-in security or error correction

Working Principles

The AT24C01A-10SI-2.7-T is based on Electrically Erasable Programmable Read-Only Memory (EEPROM) technology. It utilizes a floating gate transistor structure to store and retrieve data. The memory cells can be electrically programmed and erased using specific voltage levels applied to the control inputs. The I2C interface allows for easy communication with microcontrollers or other devices.

Detailed Application Field Plans

The AT24C01A-10SI-2.7-T finds applications in various electronic systems, including but not limited to: - Consumer electronics: TVs, set-top boxes, remote controls - Automotive: Keyless entry systems, dashboard displays - Industrial automation: Data loggers, sensor calibration, equipment configuration - Medical devices: Patient monitoring systems, portable diagnostic tools - Smart home: Home automation controllers, smart lighting systems

Detailed and Complete Alternative Models

  • AT24C02: 2 Kilobit EEPROM
  • AT24C04: 4 Kilobit EEPROM
  • AT24C08: 8 Kilobit EEPROM
  • AT24C16: 16 Kilobit EEPROM
  • AT24C32: 32 Kilobit EEPROM
  • AT24C64: 64 Kilobit EEPROM
  • AT24C128: 128 Kilobit EEPROM
  • AT24C256: 256 Kilobit EEPROM
  • AT24C512: 512 Kilobit EEPROM
  • AT24C1024: 1 Megabit EEPROM

(Note: The above list includes alternative models with varying memory capacities.)

In conclusion, the AT24C01A-10SI-2.7-T is a small-sized, low-power EEPROM IC used for non-volatile data storage in a wide range of electronic devices. Its high reliability and easy integration make it suitable for various applications across different industries. While it has some limitations in terms of memory capacity and write cycle speed, there are alternative models available with higher capacities to suit specific requirements.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de AT24C01A-10SI-2.7-T en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of AT24C01A-10SI-2.7-T in technical solutions:

  1. Q: What is the AT24C01A-10SI-2.7-T? A: The AT24C01A-10SI-2.7-T is a 1K-bit (128 x 8) electrically erasable programmable read-only memory (EEPROM) chip.

  2. Q: What is the operating voltage range for the AT24C01A-10SI-2.7-T? A: The operating voltage range for this chip is typically between 2.7V and 5.5V.

  3. Q: How can I interface with the AT24C01A-10SI-2.7-T? A: The AT24C01A-10SI-2.7-T uses an I2C (Inter-Integrated Circuit) interface, which allows for easy communication with microcontrollers or other devices.

  4. Q: What is the storage capacity of the AT24C01A-10SI-2.7-T? A: The AT24C01A-10SI-2.7-T has a storage capacity of 1 kilobit, which is equivalent to 128 bytes.

  5. Q: Can I write data to the AT24C01A-10SI-2.7-T multiple times? A: Yes, the AT24C01A-10SI-2.7-T supports multiple write cycles, allowing you to update or modify the stored data.

  6. Q: Is the data stored in the AT24C01A-10SI-2.7-T non-volatile? A: Yes, the data stored in the AT24C01A-10SI-2.7-T is non-volatile, meaning it retains its stored information even when power is removed.

  7. Q: What is the maximum clock frequency supported by the AT24C01A-10SI-2.7-T? A: The AT24C01A-10SI-2.7-T supports a maximum clock frequency of 400 kHz.

  8. Q: Can I use multiple AT24C01A-10SI-2.7-T chips in my application? A: Yes, you can use multiple AT24C01A-10SI-2.7-T chips in your application by assigning unique I2C addresses to each chip.

  9. Q: Is the AT24C01A-10SI-2.7-T suitable for low-power applications? A: Yes, the AT24C01A-10SI-2.7-T has low power consumption, making it suitable for battery-powered or energy-efficient devices.

  10. Q: Are there any specific temperature requirements for the AT24C01A-10SI-2.7-T? A: The AT24C01A-10SI-2.7-T has an extended temperature range of -40°C to +85°C, allowing it to operate in various environments.

Please note that these answers are general and may vary depending on the specific application and requirements.