Consulte las especificaciones para obtener detalles del producto.
AT25256AW-10SI-2.7-T
Basic Information Overview
Category: Integrated Circuit (IC)
Use: Non-volatile Serial EEPROM Memory
Characteristics: - Low-power CMOS technology - High-speed operation - Wide voltage range - Small form factor - Reliable data retention - Easy to integrate into various electronic systems
Package: SOIC (Small Outline Integrated Circuit)
Essence: The AT25256AW-10SI-2.7-T is a 256-Kilobit (32,768 x 8) electrically erasable programmable read-only memory (EEPROM) integrated circuit.
Packaging/Quantity: Available in tape and reel packaging with 2,500 units per reel.
Specifications
- Operating Voltage Range: 2.7V to 5.5V
- Operating Temperature Range: -40°C to +85°C
- Write Time: 5ms (typical)
- Data Retention: 100 years (minimum)
- Endurance: 1,000,000 write cycles (minimum)
Detailed Pin Configuration
The AT25256AW-10SI-2.7-T has an 8-pin configuration as follows:
- Chip Select (/CS)
- Serial Clock (SCK)
- Serial Data Input/Output (SI/O)
- Write Protect (/WP)
- Ground (GND)
- Serial Data Output (SO)
- VCC Supply Voltage
- Hold (/HOLD)
Functional Features
- Byte and Page-level Write Operations
- Sequential Read Operation
- Software and Hardware Write Protection
- Self-timed Erase and Write Cycles
- Fast Write Cycle Times
- Flexible Power Saving Modes
Advantages and Disadvantages
Advantages: - Low power consumption - High-speed operation - Wide voltage range compatibility - Reliable data retention - Easy integration into various electronic systems
Disadvantages: - Limited storage capacity (256-Kilobit)
Working Principles
The AT25256AW-10SI-2.7-T operates based on the principles of electrically erasable programmable read-only memory (EEPROM) technology. It allows for non-volatile storage of data, which can be written, erased, and read electronically.
Detailed Application Field Plans
The AT25256AW-10SI-2.7-T is commonly used in various electronic devices and applications, including but not limited to: - Consumer electronics - Automotive systems - Industrial control systems - Medical equipment - Communication devices - Security systems
Detailed and Complete Alternative Models
Some alternative models to the AT25256AW-10SI-2.7-T include: - AT25080A-10PU-2.7 - AT25128A-10TU-2.7 - AT25320A-10PI-2.7 - AT25512-10UI-2.7
These models offer similar functionality and characteristics, providing options for different project requirements.
Word count: 275 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de AT25256AW-10SI-2.7-T en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of AT25256AW-10SI-2.7-T in technical solutions:
Q: What is the AT25256AW-10SI-2.7-T? A: The AT25256AW-10SI-2.7-T is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by Microchip Technology.
Q: What is the storage capacity of the AT25256AW-10SI-2.7-T? A: The AT25256AW-10SI-2.7-T has a storage capacity of 256 kilobits (32 kilobytes).
Q: What is the operating voltage range for this chip? A: The AT25256AW-10SI-2.7-T operates within a voltage range of 2.7V to 5.5V.
Q: What is the maximum clock frequency supported by this chip? A: The AT25256AW-10SI-2.7-T supports a maximum clock frequency of 20 MHz.
Q: Can this chip be used for both read and write operations? A: Yes, the AT25256AW-10SI-2.7-T supports both read and write operations.
Q: What is the typical endurance of this EEPROM chip? A: The AT25256AW-10SI-2.7-T has a typical endurance of 1 million write cycles.
Q: Does this chip have any built-in security features? A: Yes, the AT25256AW-10SI-2.7-T provides hardware and software write protection options to prevent unauthorized access.
Q: What is the typical data retention period of this chip? A: The AT25256AW-10SI-2.7-T has a typical data retention period of 100 years.
Q: Can this chip be used in automotive applications? A: Yes, the AT25256AW-10SI-2.7-T is designed to meet the requirements of automotive applications.
Q: What are some common applications for the AT25256AW-10SI-2.7-T? A: This EEPROM chip is commonly used in various technical solutions such as automotive systems, industrial control systems, consumer electronics, and medical devices.
Please note that these answers are general and may vary depending on specific use cases and requirements.